Dual Motor Lettering for the Rear Tailgate
This decorative Dual Motor wordmark badge comes in black or silver ABS with pre-applied 3M double-sided tape. It is listed for Model 3 and Model Y rear panels. The lettering does not change the vehicle’s powertrain or factory trim.
- Dual Motor Lettering
- ABS Plastic
- Black or Silver
- Pre-Applied Tape
Key Features
-
Dual Motor Lettering
A decorative rear wordmark adds lettering to the tailgate area.
-
ABS Construction
The badge is made from ABS plastic with a black or silver finish.
-
Pre-Applied Tape
Double-sided 3M tape is supplied on the badge for surface attachment.
-
Two Finish Options
Choose black or silver to suit the surrounding rear trim.
-
Post-Install Care
Keep the installed badge dry and avoid car washing for at least 24 hours.
Highlights
Dual Motor Wordmark
Raised lettering forms the Dual Motor badge. The silver example shown includes an underline.
Rear Appearance
The badge sits on the exterior rear panel, as shown in this installation example. Choose a location that leaves the camera, lights, buttons and panel gaps clear.
Choose Black or Silver
Two finishes are listed. Choose the color to suit the rear trim.
Adhesive Attachment
Clean and dry a suitable surface, test the alignment, then peel and press the supplied tape. Keep the area dry for at least 24 hours and follow the tape instructions for actual temperature and surface conditions.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 | 2017–2025 | Including Highland. |
| Model Y | 2020–2025 | Including Juniper. |
Fits Model 3 2017–2025 including Highland and Model Y 2020–2025 including Juniper.
Specifications
| Product Type | Decorative Dual Motor tail wordmark badge |
|---|---|
| Compatible Models | Model 3 (2017–2025, including Highland); Model Y (2020–2025, including Juniper), subject to actual mounting-surface fit |
| Position / Location | Exterior rear tailgate panel |
| Material | ABS plastic |
| Color | Black / Silver |
| Quantity | 1 badge |
| Installation Type | Pre-applied 3M double-sided tape |
| Care Instructions | Damp microfiber cloth; mild soap; no abrasives or harsh chemicals |
| Shipping Weight | 200 g |
What's in the Box
- 1×Dual Motor wordmark badge (selected color)
- Pre-applied 3M double-sided tape
- Installation instructions
Installation
- Test badge placement and alignment without removing the backing.
- Clean with a product suitable for that finish and dry the area fully.
- Peel the tape backing and attach at the tested location. Apply even pressure with a clean cloth for 30 seconds.
- Keep dry and avoid car washing for at least 24 hours.
Good to Know
Caution
- Decorative lettering does not add motors or change vehicle performance, configuration or factory trim.
- Test placement on the surface before removing the backing.
- Use a cleaner approved for the actual paint, wrap or coating.
- Avoid water and car washing for at least 24 hours after installation. Follow the supplied tape preparation and cure conditions; this is not a guarantee of full strength in every environment.
Care
- Use a damp microfiber cloth and mild soap for dirt; avoid abrasives and harsh chemicals.
FAQ
Does the badge change the vehicle’s performance?
No. It is exterior lettering and does not add a motor, alter the powertrain or establish a factory Performance trim.
Are both finishes available?
The listed options are black and silver.
When can I wash the car?
Keep the badge dry and avoid car washing for at least 24 hours.
How should I remove an old badge?
Use a method suitable for the actual paint, wrap or coating. Heat and solvents can damage some finishes.
English 
German 
Spanish 