Sill and Lower-Pillar Guards for Model Y Juniper
Cover the frequently contacted sill and lower-pillar entry trim of Model Y Juniper (2025+) with molded ABS guards. Choose carbon fiber pattern or Original Car Black, then select the coverage: 2 front-door pieces, 4 front-and-rear sill pieces, or the 8-piece set with lower A-pillar and C-pillar guards. The 8-piece option is specifically listed for left-hand drive.
- Molded ABS
- Carbon Pattern or Black
- Hook-and-Loop Fit
- 2 / 4 / 8 Pieces
Key Features
-
Sill and lower-trim coverage
The 8-piece set covers front and rear sills plus the lower A-pillar and C-pillar entry areas.
-
Cover the flocked entry trim
Molded guards add a wipe-clean surface over the selected sill and lower-pillar areas.
-
Molded ABS
The carbon-pattern option has a laser-engraved carbon appearance; the guards are not real carbon fiber.
-
Two Colors
Choose the carbon fiber pattern or original car black
-
Hook-and-loop attachment
The covers tuck at the original rubber-strip edges and use hook-and-loop fasteners.
-
Three Set Sizes
Order 2 pieces for the front doors, 4 pieces for front and rear, or the 8-piece full set
Highlights
Cover the Entry Trim
The covers fit over the selected sill and lower-pillar surfaces that shoes and luggage may contact. They are lower interior trim guards, not structural pillar parts.
Carbon Pattern Set
The patterned option uses an ABS surface with a carbon fiber appearance. Choose the 2-, 4- or 8-piece coverage option; it is not real carbon fiber.
Original Car Black Set
The black option gives the same coverage choices a plain interior finish. Only the 8-piece selection includes the additional lower-pillar guards and is listed for left-hand drive.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model Y Juniper | 2025+ | 8-piece full set listed for left-hand drive |
Fits Model Y Juniper 2025+.
Specifications
| Product Type | Interior door sill, A-pillar and C-pillar protection kit |
|---|---|
| Compatible Models | Model Y Juniper (2025+) |
| Position / Location | Front and rear door sills, A-pillar and C-pillar bottom areas |
| Material | ABS, injection molded |
| Color | Carbon fiber pattern or original car black |
| Pattern / Weave | Carbon fiber appearance on patterned option; not real carbon fiber |
| Quantity | 8 pieces (full set), 4 pieces (front and rear) or 2 pieces (front doors) |
| Installation Type | Rubber-strip edge fit with hook-and-loop attachment |
| Hand Drive (LHD/RHD) | 8-piece set listed for left-hand drive |
| Care Instructions | Wipe with a damp cloth; dry the surfaces |
What's in the Box
- 8 PCS set: front and rear door sill strips, A-pillar guards and C-pillar guards (left-hand drive)
- 4 PCS set: front and rear door sill strips
- 2 PCS set: front door sill strips
- Velcro hooks for attachment
Installation
- Identify each piece and dry-fit it at its corresponding sill or lower-pillar location. Stop if the guard requires force or the shape does not match.
- Tuck the intended edge at the original rubber strip and secure the supplied hook-and-loop attachment.
- Keep seals, seat-belt paths, moving seat parts and any airbag deployment areas unobstructed.
Good to Know
Caution
- The 8-piece set is for left-hand-drive vehicles. The 8-piece option is expressly listed for left-hand drive.
- Fit only at the intended lower sill and pillar-bottom locations. Keep door seals, seat belts, seat movement and airbag deployment areas clear; stop use if secure fitting or normal operation cannot be achieved.
- Remove the pieces gently. Hook-and-loop contact and removal can affect the original flocking.
Care
- Wipe with a damp cloth and dry.
FAQ
What does each set contain?
The 2-piece option covers the front sills, the 4-piece option covers front and rear sills, and the 8-piece option adds lower A-pillar and C-pillar guards. The 8-piece selection is listed for left-hand drive.
Is the carbon pattern real carbon fiber?
No. The guards are injection-molded ABS. Carbon fiber pattern is a surface appearance option; Original Car Black is the other finish.
How are the guards secured?
They fit at the original rubber-strip edges and use hook-and-loop fasteners.
Can they be removed without affecting the flocking?
Removal effects depend on the original surface and attachment. Peel gently and avoid pulling on the flocking; damage-free removal cannot be guaranteed.
English 
German 
Spanish 