Metal-Face Pedal Covers for Model S and Model X
This TSL0156 set pairs a wide brake cover with a narrow accelerator cover for the listed Model S and Model X 2017–2021 range. The metal faces have black rubber strips and shaped rubber backing.
- Two Covers
- Metal Faces
- Rubber Strips
- Matched Pedal Fit
Características principales
-
Two-piece set
One wide brake-pedal cover and one narrow accelerator-pedal cover.
-
Model S/X listing
TSL0156 fits Model S and Model X 2017–2021.
-
Metal face
A silver-colored metal surface changes the appearance of the original pedal faces.
-
Rubber strips
Raised black rubber strips run across the metal faces.
-
Sleeve-style backing
The shaped rubber backing wraps the matching pedal profile without drilling or welding.
Aspectos destacados
Wide Brake and Narrow Accelerator
The set contains one cover for each original pedal. The silver-colored faces and black rubber strips form the visible finish; these are covers rather than replacements for the pedal mechanism or electronics.
Shaped Rubber Backing
The sleeve-style backing must wrap the correct pedal profile fully. This cover replaces the original brake rubber cover; covers are not stacked.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model S | 2017–2021 | TSL0156. |
| Model X | 2017–2021 | TSL0156. |
Does not fit previously replaced pedals. This set does not change the pedal mechanism.
Especificaciones
| Tipo de producto | Brake and accelerator pedal-cover set |
|---|---|
| Compatible Models | Model S and Model X 2017–2021 |
| Position / Location | Original brake and accelerator pedal faces |
| Material | Metal faces with rubber strips and shaped rubber backing |
| Cantidad | 2 covers: 1 brake, 1 accelerator |
| Installation Type | Sleeve-style fit; replaces the original brake rubber cover, without stacking |
| Contenido del paquete | 1 brake cover and 1 accelerator cover |
| Peso del envío | 320 g |
What's in the Box
- 1×Brake-pedal cover
- 1×Accelerator-pedal cover
Instalación
- Remove the original brake rubber cover. Fit the brake cover and accelerator cover with every rubber retaining edge fully seated, without stacking or improvised adhesive.
Conviene saber
Precaución
- The original brake rubber cover is removed; brake covers are not stacked and need no tape, glue or extra fasteners.
Cuidado
- Keep the pedal faces and footwear contact surfaces free of mud and oily cleaners. Dry the surfaces after cleaning.
Preguntas frecuentes
What comes in the set?
One wide brake-pedal cover and one narrow accelerator-pedal cover; the original pedal mechanisms and electronics remain in place.
Which vehicles are listed?
Model S and Model X 2017–2021 under TSL0156.
Can I fit the brake cover over the original rubber cover?
Follow the matched installation instructions, which call for removing the original brake rubber cover. Do not stack covers or use adhesive to make an incorrect fit stay in place.
English 
German 
Spanish 