Carbon Fiber Door Striker Surrounds
Self-adhesive dry carbon fiber covers for the body-side door striker bases. Available in Glossy, Matte, Red or Forged. The shaped opening surrounds the striker; the cover is decorative trim rather than a replacement lock or latch.
- Dry Carbon Fiber
- Four Finishes
- Striker-Base Trim
- Self-Adhesive
Características principales
-
Door Striker Surround
The cover decorates the base around the metal door striker on the body-side door opening.
-
Dry Carbon Fiber
The listed material is dry carbon fiber; Glossy, Matte, Red and Forged are separate finish selections.
-
Open Center
The shaped center opening leaves the metal striker exposed rather than replacing the latch or lock mechanism.
-
Self-Adhesive Back
The listed mounting method uses the cover adhesive layer without additional glue.
-
Profile Comparison
Shaped to the striker base, opening and surrounding clearance.
-
Door Engagement Path
The cover and adhesive sit outside the door latch engagement path.
Aspectos destacados
Matte Finish Example
The Matte variant photo shows the woven finish around the exposed metal striker. The layout is an appearance example.
Choose the Finish
Glossy, Matte, Red and Forged are separate selections. The finish SKU order is A for Glossy, C for Matte, B for Red and D for Forged.
Adhesive at the Base
Trial-fit the shaped opening and outer edges before peeling the backing. Apply adhesive only to the intended base surround while leaving the metal striker and engagement path clear.
Preserve Door Latching
The cover does not replace, lubricate or adjust the lock mechanism.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model 3 | Listed application. No model-year-wide fit guarantee. | |
| Model Y | Listed application. No model-year-wide fit guarantee. | |
| Model YL | Listed application. No model-year-wide fit guarantee. |
Highland, Juniper and Model YL revisions do not all use an identical outline.
Especificaciones
| Tipo de producto | Decorative door striker-base cover |
|---|---|
| Compatible Models | Listed for Model 3, Model Y and Model YL |
| Position / Location | Body-side door opening, around the striker base |
| Material | Dry carbon fiber |
| Surface Finish | Glossy / Matte / Red / Forged selection |
| Peso | 80 g shipping weight; not a measured individual cover weight |
| Installation Type | Self-adhesive; no additional glue required |
| Contenido del paquete | Covers in selected finish |
| SKU | Glossy TSL3625-A; Matte TSL3625-C; Red TSL3625-B; Forged TSL3625-D |
What's in the Box
- Door striker-base covers in the selected finish.
- Pictured vehicle parts are not included; this is decorative trim rather than a replacement striker or latch.
Instalación
- Hold the cover against the striker base with the adhesive backing intact.
- Do not adjust striker hardware to fit the cover.
- Prepare and dry the intended adhesive area using supplies compatible with the surface and actual adhesive instructions.
- Align and attach without covering the metal striker or engagement path.
Conviene saber
Precaución
- Trial-fit with the backing intact.
- Do not loosen, adjust or replace the striker mounting hardware to fit the decorative cover. Remove a cover that contacts the latch or interferes with door closing.
- Adhesive does not establish a rustproof seal or guarantee unchanged door operation.
Cuidado
- Keep adhesive and buildup out of the striker engagement area; use surface-compatible gentle cleaning.
- Removal may leave residue or marks; follow a method compatible with the actual surface and adhesive.
Preguntas frecuentes
Which finishes are offered?
Glossy, Matte, Red and Forged. Each is a separate selection, with SKU endings A, C, B and D respectively.
How many covers will I receive?
The layout photos illustrate the covers.
Does this replace the door lock or striker?
No. It is decorative trim around the striker base.
Is it guaranteed to prevent rust or leave door operation unchanged?
No. This is not a rustproof seal or latch modification.
English 
German 
Spanish 