Eight-Strip Supplementary Seal Kit for Model Y
This EPDM rubber kit adds sealing strips around the Model Y doors, pillars and trunks. Different profiles serve the individual locations, with two front-door strips, two rear-door strips and one strip each for the A-pillar, B-pillar, frunk and rear trunk. Fit them alongside the factory seals.
- 8 Seal Strips
- EPDM Rubber
- Supplementary Seals
Características principales
-
EPDM Seals
Rubber weatherstrip profiles add a sealing layer alongside the existing seals.
-
Eight-Strip Kit
Two front-door strips, two rear-door strips, one A-pillar strip, one B-pillar strip and one strip for each trunk.
-
Position-Specific Profiles
Different cross-sections correspond to the door, pillar, frunk and rear-trunk locations.
-
Supplementary Sealing
The kit adds strips without replacing the factory weatherstrips.
-
Adhesive-Backed Fitting
The illustrated installation includes peeling the backing and trimming excess where required.
Aspectos destacados
Door and Body Locations
The kit supplies strips for door, pillar and trunk areas. Each profile has its own location.
Different Seal Profiles
The coils are grouped by their positions. The A-pillar and B-pillar groups each contain one strip, with two strips for each door group.
Strip-Specific Instructions
Each profile has its own installation path, adhesive backing and trimming instructions.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Tesla Model Y | 2020+ | Includes Juniper |
Fits Model Y 2020+, including Juniper.
Especificaciones
| Tipo de producto | Supplementary door, pillar and trunk seal kit |
|---|---|
| Compatible Models | Tesla Model Y, including Juniper |
| Material | EPDM rubber |
| Cantidad | 8 strips: 2 front door, 2 rear door, 1 A-pillar, 1 B-pillar, 1 front trunk, 1 rear trunk |
| Installation Type | Position-specific fitting; illustrated adhesive backing and trimming where required |
| Peso del envío | 1.2 kg (2.65 lb) |
What's in the Box
- 2×Front-door seal strips
- 2×Rear-door seal strips
- 1×A-pillar seal strip
- 1×B-pillar seal strip
- 1×Front-trunk seal strip
- 1×Rear-trunk seal strip
- Installation instructions
Instalación
- Identify all eight strips and their locations from the supplied instructions.
- Clean and dry the areas with finish-compatible products.
- For adhesive-backed sections, gradually remove the backing and apply even pressure along the correct path. Trim excess only where the supplied instructions require it.
- Let the adhesive set before washing.
Conviene saber
Precaución
- Do not block drains, latches, sensors or moving gaps. Stop if a strip prevents a door or trunk from closing and latching normally.
- These additional strips supplement the existing seals; do not remove factory weatherstrips to fit them.
- Noise and sealing results depend on fit, existing seals and driving conditions; the kit does not guarantee complete sound or water isolation.
Cuidado
- Wipe the strips during routine cleaning and inspect their seating and adhesion.
- Replace damaged or worn strips.
Preguntas frecuentes
How many strips come in the kit?
Eight: two front-door strips, two rear-door strips, one A-pillar strip, one B-pillar strip, one front-trunk strip and one rear-trunk strip.
Do these replace the factory seals?
No. They add supplementary strips alongside the existing factory weatherstrips.
Are all strips fitted without adhesive or trimming?
The illustrated fitting includes adhesive backing and trimming excess. Not every strip is a press-fit part.
Will it eliminate wind noise?
Noise depends on the installation, existing seals and driving conditions. Added strips do not guarantee complete noise elimination.
English 
German 
Spanish 