Carbon-Fiber Trim Cover for the Outer Charge-Port Door
Add a carbon-fiber finish to the exterior face of the original charge-port door. Choose Glossy, Matte or Forged for the separate Model 3 Highland group or the paired Model Y Juniper / Model YL 2026+ group. The shaped cover includes an open insert area.
- Outer-Door Trim
- Carbon Fiber
- Three Finishes
- Two Vehicle Groups
Características principales
-
Outer-Door Styling
The shaped cover dresses the outside face of the original charge-port door, rather than plugging or sealing the charging socket.
-
Carbon-Fiber Appearance
The carbon-fiber cover adds a dark textured surface to the charge-port-door area; choose the intended finish for the vehicle group.
-
Three Finish Selections
Glossy, Matte and Forged are available for each of the two actual vehicle groups; choose one finish rather than all three together.
-
Two Vehicle Groups
Model 3 Highland is a separate selection from the paired Model Y Juniper / Model YL 2026+ option.
-
Open Insert Area
The illustrated cover has a shaped opening that leaves the original red insert visible.
Aspectos destacados
Woven-Surface Installation Example
The installed Highland example shows a woven surface appearance around the exposed red insert. Glossy and Matte are separate finish selections; this example does not establish their fit on the other vehicle group.
Forged-Style Installation Example
The alternative Highland example shows the mottled Forged-style appearance on the outer door. The original red insert remains exposed; the trim does not seal the charging socket.
Two Door Profiles
The Highland and paired Juniper / YL groups are separate selections, each shaped to its own door contour and insert opening. The Highland photo shows the appearance only.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model 3 Highland | Highland version | Fits Model 3 Highland; separate Highland version. |
| Model Y Juniper / Model YL | Juniper version / YL 2026+ | Fits Model Y Juniper and Model YL 2026+; paired version with three finishes. |
Does not fit earlier Model 3 or Model Y, different port-door profiles, or other vehicles.
Especificaciones
| Tipo de producto | Decorative outer charge-port-door cover |
|---|---|
| Compatible Models | Selected Model 3 Highland group or paired Model Y Juniper / Model YL 2026+ group |
| Position / Location | Exterior face of the original charge-port door; not inside the charging socket |
| Material | Carbon fiber |
| Surface Finish | Glossy, Matte or Forged, by selected vehicle group |
| Peso del envío | 150 g (0.33 lb) |
What's in the Box
- Outer charge-port-door cover in the selected vehicle group and finish
Instalación
- Park the vehicle with charging disconnected. Align the cover’s insert opening and moving edges before attachment.
- Prepare the contact surface and fit the cover only under the selected product and vehicle surface instructions. Do not bridge fixed body panels, cover the hinge or latch, or insert material into the charging socket.
- Remove an unsuitable or loose cover before charging or driving. Recheck attachment and door clearance after cleaning or service.
Conviene saber
Precaución
- Keep all required lighting and reflective surfaces visible, and keep the door hinge, latch, moving gaps and charging-connector path clear. Do not bridge the door onto fixed body panels or place cover material inside the charging socket.
- The cover is decorative exterior trim. It is not a waterproof seal, a charging-socket dust cap or an electrical protection device, and it does not establish charging-performance improvements.
Cuidado
- Clean gently with products suitable for the actual cover finish and original door surface. Inspect edges and attachment; do not direct tools or liquids into the electrical socket as part of trim cleaning.
Preguntas frecuentes
Does it plug or seal the charging socket?
No. It is exterior trim for the original charge-port door, rather than a socket cap or waterproof electrical seal.
Are all three finishes included?
No. Glossy, Matte and Forged are separate selections for the chosen vehicle group.
Can I use the Highland version on Juniper or YL?
No. The Highland version does not fit Juniper or YL; those vehicles use the separate paired Juniper / YL version.
English 
German 
Spanish 