Carbon-Fiber Armrest Trim for Cybertruck
Add a carbon-fiber surface accent to the Cybertruck armrest box with this shaped adhesive-backed overlay. The specified material is dry carbon fiber, with Matte Carbon Fiber and Glossy Carbon Fiber purchase options.
- Cybertruck 2024+
- Dry Carbon Fiber
- Matte Or Glossy
- Adhesive Backed
Características principales
-
Carbon-Fiber Trim
The cover uses the dry carbon-fiber material specified for this product
-
Armrest Overlay
The shaped cover fits over the existing armrest-box surface
-
Two Finish Options
Choose Matte Carbon Fiber or Glossy Carbon Fiber
-
Adhesive Attachment
Adhesive on the back holds the cover to the prepared surface
-
Contoured Edges
The curved edges follow the pictured armrest shape
Aspectos destacados
Matte Finish Option
Choose Matte Carbon Fiber for the pictured low-gloss surface appearance. The contoured cover sits over the existing armrest-box surface.
Glossy Finish Option
Choose Glossy Carbon Fiber for the pictured reflective finish. Only the selected finish is supplied.
Adhesive-Backed Attachment
Test-position the cover before exposing the adhesive. Prepare the surface with a method appropriate for the original trim and supplied adhesive.
Preserve Armrest Operation
The overlay covers the armrest box surface only; the lid and latch keep working normally.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Cybertruck | 2024+ | Shaped to the Cybertruck armrest box contour |
Fits the Cybertruck 2024+ armrest box. Please Select is a selection placeholder, not an additional finish.
Especificaciones
| Tipo de producto | Armrest-box trim overlay |
|---|---|
| Compatible Models | Cybertruck 2024+; matching armrest-box shape |
| Position / Location | Armrest-box surface |
| Material | Dry carbon fiber |
| Surface Finish | Matte Carbon Fiber / Glossy Carbon Fiber; selected option |
| Installation Type | Adhesive-backed overlay |
| Peso del envío | 480 g (1.06 lb) |
Instalación
- Test-position the cover with the adhesive backing intact.
- Clean and dry the bonding surface using a method suitable for the original trim and adhesive.
- Expose the adhesive and align the cover carefully, then apply pressure and allow the adhesive to cure.
Conviene saber
Precaución
- Use a surface-preparation method suitable for the original trim and the supplied adhesive. Follow the adhesive instructions for pressure, temperature and curing.
- Adhesive installation does not guarantee damage-free or residue-free removal. Do not force a cover loose or assume it can be repositioned repeatedly.
Cuidado
- Wipe the finish gently with a soft cloth and suitable cleaner. Avoid abrasives.
Preguntas frecuentes
Which finishes can I choose?
Select Matte Carbon Fiber or Glossy Carbon Fiber. Please Select is a placeholder rather than a third finish.
Does this replace the armrest lid?
It is an adhesive-backed surface overlay for the existing armrest box.
Will it prevent every scratch or scuff?
The cover adds a surface layer, but its finish can still mark or wear. Avoid abrasives and rough contact.
Can I remove it without affecting the original trim?
Removal can leave adhesive residue. Follow the adhesive removal instructions and do not pry or pull forcefully.
English 
German 
Spanish 