TESVXtesvx.com
Fuente: https://tesvx.com/es/product/tesla-model-3-y-window-visor-sun-rain-guard/
0

Reseñas

Todavía no hay reseñasSé el primero en compartir tu experiencia con este producto.

Especificaciones

Tipo de productoWindow visor rain guards, 4-piece set
Compatible Models2017+ Model 3 / 2020+ Model Y / 2026+ Model YL
Installation Time15-20 minutes for all four windows
Peso del envío1.5 kg (3.31 lb)
AdhesivePre-applied 3M tape
DiseñoOriginal-curvature fit, 45-degree arc-shaped chamfer, step-down design

Detalles

Window Visors for Limited Ventilation

This four-piece plastic visor set follows the upper side-window edges of the selected Model 3, Model Y or Model YL. The overhang can help deflect some rain when a window is slightly open, depending on the weather and opening. Each vehicle set has its own contour and attaches with adhesive backing.

  • Four-Piece Set
  • Adhesive Backing
  • Selección específica del modelo
  • Upper-Window Profile

Características principales

  1. Four-Window Set

    Front-left, front-right, rear-left and rear-right visors are supplied for the selected model

  2. Upper-Window Shape

    Formed plastic edges sit above the side windows

  3. Limited Ventilation

    The overhang can help deflect some rain with a slightly opened window, depending on conditions

  4. Adhesive Attachment

    Backing strips attach to a matching clean, dry exterior surface

  5. Three Model Options

    Select the actual Model 3, Model Y or Model YL set

  6. Profile Matching

    Shaped to the upper window trim, clear of door and glass travel

Aspectos destacados

Adhesive Backing Strip - TESVX Window Visor Rain Guards
Adhesive Backing Strip

The rear backing strip attaches the visor to a suitable clean, dry exterior surface.

Check the Entire Window Edge - TESVX Window Visor Rain Guards
The Entire Window Edge

The set includes front and rear pieces for both sides. Replacement trim can have a different contour.

Front-Window Overhang - TESVX Window Visor Rain Guards
Front-Window Overhang

The visor forms an overhang at the upper window edge. With a small opening it can help divert some rain, but wind and weather can still carry water inside.

Compatibilidad

Modelo Years / Version Notas
Model 3 2017+ Including Highland
Model Y 2020+ Including Juniper
Model YL 2026+ Separate Model YL set

Model YL has its own separate set. Does not fit replaced trim layouts.

Especificaciones

Tipo de producto Window visor rain guards, 4-piece set
Compatible Models Model 3 2017+ (including Highland), Model Y 2020+ (including Juniper), Model YL 2026+
Position / Location Front left and right, rear left and right window frames
Material Plastic
Cantidad 4 pieces
Installation Type Pre-applied adhesive backing on a matching exterior trim surface
Contenido del paquete 4 window visors with adhesive backing, installation instructions
Care Instructions Mild soap, water and soft cloth; avoid washing during the adhesive cure period
Peso del envío 1.5 kg (3.3 lb)

What's in the Box

  • 4×Window visor rain guards (front left/right, rear left/right) with adhesive backing
  • 1×Installation instructions

Instalación

Difficulty
Easy
Herramientas
Suitable cleaning materials and soft cloth
  1. Park safely and dry-fit all four pieces without exposing the adhesive. Each piece has its own front/rear and left/right position on the exterior upper-window trim.
  2. Use a cleaning method compatible with the actual trim finish, then dry it fully. Fit at temperatures above 60°F (16°C).
  3. Peel the backing and align each visor to its matching fixed exterior surface. Apply even pressure as instructed without pressing on glass or bending the visor into an incorrect contour.
  4. Allow the full adhesive cure and avoid car washing for 48 hours.

Conviene saber

Precaución
  • Test-fit the selected set on the actual exterior profile before peeling the adhesive. Keep glass, seals, door movement, mirror operation and the driver’s view clear. Do not insert a visor into the window’s moving-glass channel.
  • Tesla’s frameless glass lowers slightly when a door is opened or closed; the visors sit clear of this movement.
  • The visor does not make an open window rainproof. Close the windows when conditions require and when securing the vehicle; use the original defrost and ventilation controls to maintain visibility.
Cuidado
  • Clean with mild soap and water using a soft cloth; avoid harsh chemicals and abrasive tools.
  • Removal can leave residue or mark the finish.

Preguntas frecuentes

Does the same set fit every Model 3 or Model Y?

One set fits Model 3 2017+ including Highland, and one fits Model Y 2020+ including Juniper; Model YL has its own set.

Will rain stay out of an open window?

The overhang can help deflect some rain, but wind and the opening can still let water enter. Close the windows when the conditions require.

What comes in the package?

Four window visors, one for each front and rear side window, with adhesive backing and installation instructions. Other pictured trim accessories are separate.

When can I wash the car?

After 48 hours from fitting.

Recomendados

Seleccionar especificaciones

Entrega

Se envía en 1-3 días laborables

Free shipping on eligible orders of US$149 or more

Métodos de pago

  • PayPalPayPal
  • Tarjetas de débito y créditoVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Los métodos disponibles pueden variar según la moneda y el país de facturación; la lista definitiva se muestra al finalizar la compra.

Servicio

  • Pago seguro

    Los pagos se procesan a través de una conexión cifrada.

  • Asistencia posventa

    Contacta con nosotros si tienes dudas sobre la instalación o el uso.

Especificaciones

Tipo de producto
Window visor rain guards, 4-piece set
Compatible Models
2017+ Model 3 / 2020+ Model Y / 2026+ Model YL
Installation Time
15-20 minutes for all four windows
Peso del envío
1.5 kg (3.31 lb)
Adhesive
Pre-applied 3M tape
Diseño
Original-curvature fit, 45-degree arc-shaped chamfer, step-down design

Escribe una reseña

4-Piece Window Visor Rain Guards with Pre-Applied 3M Tape for Tesla Model 3 / Model Y / YL
Valoración general *
¿Qué destacarías?opcional, hasta 3
Añadir fotos0 / 5
JPG, PNG o WebP, hasta 5 MB cada uno.

Las reseñas se revisan antes de publicarse. La etiqueta Compra verificada se añade automáticamente cuando tu correo electrónico coincide con el de un pedido.

TESVX product image
4-Piece Window Visor Rain Guards with Pre-Applied 3M Tape for Tesla Model 3 / Model Y / YL

US$99.99

Añadir al carrito Este producto tiene múltiples variantes. Las opciones se pueden elegir en la página de producto