A 2-Inch Receiver Kit for Your Model Y
This mechanical kit provides a square 2-inch tow hitch receiver and mounting hardware for the selected Model Y version. It fits within the rear bumper mounting area. The hitch ball and hook are not included. Receiver installation does not increase the vehicle’s approved towing or payload limits.
- 2-Inch Receiver
- Mechanical Kit
- Bolted Fitting
- Vehicle-Specific Version
Características principales
-
2-Inch Receiver
The square receiver is specified as 2 inches (50.8 mm).
-
Mechanical Kit
The package includes the receiver, mounting hardware and installation instructions; the hitch ball and hook are separate.
-
Rear Mounting Position
The assembly mounts within the rear bumper area using the specified existing attachment locations.
-
Coated Steel Finish
The steel assembly has a black powder-coated finish.
-
Version Selection
Offered as original Model Y, Juniper and six-seat YL options.
-
Vehicle Limits Apply
A receiver alone does not provide a complete tow package, trailer wiring or Trailer Mode functionality.
Aspectos destacados
Receiver and Accessory
Takes a 2-inch accessory shank or ball mount. Receiver size does not specify the required hitch-ball size or establish a permitted load.
Vehicle and System Limits
Follow the applicable vehicle manual and the documented ratings of the complete installation. Trailer tongue load and a carrier’s vertical load are different limits; include the carrier’s own weight and any cantilever restrictions.
Tow Setup
A bare receiver does not enable trailer lighting or Trailer Mode; the vehicle tow package, electrical equipment and software are separate.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model Y | 2020–February 2025 | TSL8203 option. |
| Model Y Juniper | March 2025+ | TSL8203-new option. |
| Model YL | 2026+ | Six-seat TSL8203-new option. |
Options are tied to build, seating layout and market region. Model Y towing limits do not carry over to Model YL.
Especificaciones
| Tipo de producto | Mechanical tow hitch receiver and mounting-hardware kit |
|---|---|
| Compatible Models | Model Y 2020–February 2025; Juniper March 2025+; YL six-seat 2026+ options |
| Position / Location | Rear bumper mounting area |
| Surface Finish | Black powder-coated finish |
| Cantidad | 1 receiver assembly with mounting hardware; hitch ball and hook not included |
| Connector Type | 2-inch square receiver (50.8 mm); not a specification of hitch-ball diameter |
| Installation Type | Vehicle-specific bolted installation with manufacturer-specified fasteners and torque |
| Drilling Required | Mounts at the existing attachment locations |
| Peso del envío | 13 kg (28.66 lb); shipping weight, not measured net weight |
What's in the Box
- 1 tow hitch receiver assembly for the selected vehicle version.
- Mounting hardware and bolts; exact quantities follow the supplied kit.
- Installation instructions.
- Hitch ball and hook are not included. This mechanical kit does not include a complete vehicle tow-package retrofit.
Instalación
- Follow the applicable vehicle service procedure to access the rear mounting area and protect trim, wiring and vehicle components.
- Fit at the specified existing attachment points using the correct kit fasteners and documented torque. Do not drill, cut or force a mismatched assembly.
- Refit the panels.
- Trailer electrical connections use Tesla-designed connectors; no splicing into vehicle wiring.
Conviene saber
Precaución
- Receiver installation does not increase the vehicle’s approved towing or payload limits; follow the applicable manual and complete-system ratings.
- This receiver is not for recovering or transporting the Tesla.
Cuidado
- Inspect fasteners, mounting points, receiver retention and coating regularly; stop use if loose, cracked, bent or corroded.
- Keep the receiver clean and dry when not in use and use the appropriate cover.
Preguntas frecuentes
Does this allow a Model Y to tow 6,500 lb?
No. Installing the receiver does not increase the vehicle’s approved towing or payload limits. Follow the applicable vehicle manual and the lowest documented limit of the complete hitch, mount, trailer or carrier setup.
Is this a complete tow-package retrofit?
No. It is a mechanical receiver and hardware kit. Vehicle towing equipment, electrical connections and software are separate.
Does the trailer tongue limit also apply to a bike rack?
Do not treat those limits as the same. Carrier loading includes the rack’s own weight and its leverage from the receiver; use the applicable vehicle and accessory instructions.
Are a hitch ball and hook included?
No. Select compatible accessories separately. The 2-inch receiver dimension describes the accessory shank interface, not the required hitch-ball diameter.
Which versions are offered?
TSL8203 for original Model Y, and TSL8203-new for Juniper and six-seat YL.
English 
German 
Spanish 