A Carbon-Pattern Accent for the Washer-Fluid Cap
This ABS trim cover adds a carbon-fiber pattern to the exterior face of the Cybertruck windshield-washer filler cap. It attaches with adhesive backing after cleaning the surface, peeling the backing and pressing the trim into position. The original cap stays in place and keeps opening and closing normally.
- ABS Plastic
- Carbon-Fiber Pattern
- Adhesive Backing
- Decorative Trim
Características principales
-
Filler-Cap Trim
This decorative cover fits over the exterior face of a matching Cybertruck windshield-washer filler cap; it is not a replacement reservoir cap.
-
ABS Body
The selected material is ABS plastic. The carbon-fiber appearance is a surface pattern, rather than a real carbon-fiber composite construction.
-
Patterned Face
The product image shows a carbon-fiber pattern around a washer symbol, shaped to the cap face.
-
Adhesive Application
The source describes cleaning the cap surface, peeling the backing and pressing the trim into position without tools.
-
Normal Cap Access
The original cap opens and closes normally, with the hinge, tether and filler opening unobstructed.
-
Decorative Finish
The cover changes the visible cap surface. It does not repair a damaged cap, restore its seal or guarantee scratch-free service.
Aspectos destacados
Patterned Cap Face
The complete product image shows the patterned trim at the washer-fluid cap and as a separate part. It is ABS with a carbon-fiber pattern, rather than real carbon fiber.
Clean, Peel and Press
Follow the adhesive instructions; do not force the part onto the cap.
Keep the Original Cap Working
The trim sits on the cap face. The hinge, tether, filler opening and closing path must stay clear, and the original cap must still open and close normally.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Cybertruck | 2024+ | Washer-fluid filler-cap face only. |
This is a decorative overlay for the washer-fluid cap, not a replacement sealing cap or trim for another fluid reservoir.
Especificaciones
| Tipo de producto | Windshield-washer filler-cap decorative trim cover |
|---|---|
| Compatible Models | Cybertruck 2024+; actual cap outline and clearance must match |
| Position / Location | Exterior face of the windshield-washer fluid filler cap |
| Material | ABS plastic |
| Pattern / Weave | Carbon-fiber pattern; not real carbon fiber |
| Método de instalación | Adhesive backing: clean, peel and press |
What's in the Box
- Windshield-washer filler-cap trim cover with adhesive backing
Instalación
- Identify the washer-fluid filler cap and line up the trim with its exterior face.
- Clean and dry the contact surface.
- Peel off the backing and press the trim into the matching position without covering the hinge, tether or filler opening.
Conviene saber
Precaución
- Keep the original cap hinge, tether, opening and closing path unobstructed.
- This is decorative trim; it does not replace the original sealing cap.
- Follow the actual adhesive instructions and use surface-compatible cleaning products. No adhesive brand, curing time or residue-free removal guarantee is specified.
Cuidado
- Clean with products suitable for the pattern and cap surface.
Preguntas frecuentes
Is the trim real carbon fiber?
No. The material option is ABS plastic with a carbon-fiber pattern.
Does it replace the washer-fluid cap?
No. It is decorative trim applied to the original cap face; the original cap remains responsible for closing the reservoir.
How is it attached?
The source describes adhesive backing: clean the surface, peel the backing and press the trim into place after a test fit.
English 
German 
Spanish 