Performance-Style ABS Rear Spoiler with Matte Black, Glossy Black & Matte Carbon Finishes for Tesla Model Y Juniper

ABS Trunk-Edge Spoiler for Model Y Juniper

Add a raised rear profile to the Model Y Juniper with an ABS trunk-edge spoiler in Matte Black, Glossy Black or Matte Carbon. The listed mounting method uses pre-applied adhesive tape.

Juniper 2025+
ABS Body
Three Finishes
Adhesive Mounting

Características principales

Juniper Application

This rear trunk-edge spoiler is listed for the refreshed Model Y Juniper from 2025, excluding the pre-refresh Model Y.
ABS Body

The spoiler uses ABS plastic; the Matte Carbon option is a carbon-fiber-look finish rather than a solid carbon-fiber part.
Three Finish Options

Choose Matte Black, Glossy Black or Matte Carbon for the selected spoiler.
Adhesive Attachment

Pre-applied adhesive tape provides the listed mounting method without drilling new holes in the trunk lid.
Trial Fit First

Trial-fit the full trunk-edge contour and both ends before removing the adhesive liner.
Curing and Care

Allow the bond to cure before washing or driving with the fitted spoiler.

Aspectos destacados

Three Selected Finishes - TESVX Spoiler — Three Selected Finishes

Matte Black and Glossy Black give different surface reflections, while Matte Carbon adds a carbon-fiber-look pattern. The pictured patterned finish is an ABS spoiler rather than solid carbon fiber.

Curved Trunk-Edge Profile

The long, curved spoiler follows the rear trunk-edge area. Shaped to the complete Juniper trunk-edge contact line.

Tape Mounting, No New Holes

Pre-applied adhesive is the listed mounting method. Trial-fit with the liner intact.

Styling Without Performance Promises

Performance-style describes the spoiler appearance. It does not establish reduced drag, increased high-speed stability or equivalence to a Tesla factory spoiler.

Compatibilidad

Modelo	Years / Version	Notas
Model Y Juniper	2025+	Rear trunk-edge application; excludes the pre-refresh Model Y.

Does not fit Model YL or other unlisted body versions.

Especificaciones

Tipo de producto	Performance-style rear trunk spoiler
Compatible Models	Model Y Juniper 2025+; excludes pre-refresh Model Y
Position / Location	Rear trunk-lid edge
Material	ABS plastic
Surface Finish	Glossy or matte, by selected option
Color	Matte Black; Glossy Black; Matte Carbon (carbon-fiber-look finish)
Cantidad	1 spoiler in the selected finish
Peso	1.2 kg shipping weight; not installed spoiler weight
Installation Type	Pre-applied adhesive tape; no new drilling
Care Instructions	pH-neutral car soap and soft microfiber cloth after adhesive curing
SKU	TSL4014-matte black / TSL4014-glossy black / TSL4014-matte carbon

What's in the Box

1 ABS rear spoiler in the selected finish, with pre-applied adhesive tape
The pictured vehicle is not included.

Instalación

Difficulty: Easy
Herramientas: Paint-compatible cleaning supplies and soft cloth

Clean and dry the attachment area using paint-compatible supplies and the actual tape preparation instructions.
Trial-fit with the adhesive liner intact along both ends and the full contact line.
Align the spoiler, remove the liner and apply firm pressure.
Allow the specified adhesive curing period before washing or using the fitted spoiler.

Conviene saber

Precaución

Use paint-compatible cleaning and the supplied adhesive preparation instructions. Avoid treating tape attachment as a guarantee of residue-free removal.
Allow the adhesive to cure for the supplied period before washing.

Cuidado

Use pH-neutral car soap and a soft microfiber cloth after curing.
An automatic car wash can place additional load on the attachment.
Seek help for removal if needed; adhesive residue or surface marks are possible.