Two-Cup Adjustable Bracket For Stationary Starlink Mini Use
The light grey SL-01 bracket has two suction attachment points and adjustable joints for positioning the listed Starlink Mini on a compatible smooth surface. For stationary use only; the bracket has no road-speed or hurricane rating.
- Starlink Mini
- Two Suction Points
- Adjustable Joints
- Stationary Use
Características principales
-
Mini Bracket
The SL-01 layout holds the listed Starlink Mini interface
-
Two Suction Points
The assembly has a suction cup at each end
-
Cup Diameter
The listed suction cup diameter is 9 cm (3.54 in)
-
Adjustable Joints
Ball and geared joints provide position adjustment when secured
-
Press Attachment
The cup attachment uses a press-operated mechanism
-
Light Grey Finish
The bracket has a light grey exterior
Aspectos destacados
Two-Cup Bracket Layout
The bracket spans the rear of the Mini with a cup at each end.
Adjustable Cup Arms
The ball and geared joints let you position the dish and cup arms. Secure the adjustment points; articulation does not establish suction retention on every curved surface.
Clean Surface Contact
The listed cup diameter is 9 cm (3.54 in). Choose a clean, dry, smooth non-porous surface with room for both complete cup seals, then follow the cup attachment and release instructions.
Stationary Setup And Alignment
Use independent retention against unexpected suction release and remove the bracket and dish before vehicle movement.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Starlink Mini | Smooth glass or non-porous surfaces |
For the listed Starlink Mini interface and compatible smooth surfaces during stationary use. This listing does not establish moving-vehicle use, every curved-surface fit or signal transmission through vehicle glass.
Especificaciones
| Tipo de producto | SL-01 series suction cup mount bracket |
|---|---|
| Compatible Models | Starlink Mini satellite dish |
| Position / Location | Compatible smooth glass or non-porous surface during stationary use |
| Color | Light grey |
| Dimensiones | Suction cup diameter 9 cm (3.54 in) |
| Installation Type | Press-operated suction attachment; follow cup release instructions |
| Peso del envío | 600 g (1.32 lb) |
| Rotation Angle | 360° universal ball joint with a gear-meshing rotating shaft |
Instalación
- Park the vehicle and choose a suitable surface that allows full contact at both cups and avoids controls, airbags and moving parts.
- Clean and dry the surface and cup contact areas.
- Attach the bracket and dish, support the assembly and operate the cups to establish full contact.
- Secure the adjustment joints and an independent tether.
- Inspect contact during use. Support the dish while releasing the cups.
Conviene saber
Precaución
- Use this bracket for stationary positioning only; it has no road-speed retention or hurricane-wind rating.
- Both cups need complete contact on clean, dry, smooth non-porous surfaces. Articulation does not make curved, coated or textured surfaces suitable.
- Use a suitable independent safety tether against unexpected suction release.
- A cabin mounting example is not approval for use while driving.
- Glass, coatings and obstructions can affect reception; suction mounting does not guarantee connectivity.
Cuidado
- Keep cup seals clean.
- Support the dish while releasing the seal.
Preguntas frecuentes
Can I use the bracket while driving?
No. It is for stationary use only and has no road-speed retention rating.
Does it fit every curved window or roof?
No. Both cup seals need full contact with a compatible smooth surface. Adjustable joints do not make an unsuitable curved, coated or textured surface suitable.
Does it guarantee a stable signal through glass?
No. The glass and surroundings can affect reception.
Is it rated for hurricane winds?
It has no hurricane-wind rating and is not a severe-weather mount.
Is the dish included?
This is a mount-bracket listing. The illustrated Starlink Mini is the device being mounted, not an included satellite internet kit.
English 
German 
Spanish 