Adjustable Magnetic Mount for Stationary Mini Setups
Position a Starlink Mini on a suitable clean, flat iron surface with this adjustable magnetic mount. The central joint sets the antenna angle, and the rubberized contact coating sits under the magnetic support. It is for stationary use only. Does not fit the Mini base with three holes on top.
- Stationary Use Only
- Earlier Mini Base
- Adjustable Joint
- Magnetic Attachment
Características principales
-
Mini Base Connection
The adapter is shaped for the matching earlier Mini pipe-adapter base.
-
Magnetic Feet
The support uses circular magnetic feet for a clean, flat iron surface.
-
Adjustable Joint
The central joint lets you set the antenna angle and lock it with the adjustment handle.
-
Rubberized Coating
A rubberized contact coating sits between the magnetic support and mounting surface.
-
No Surface Drilling
Magnetic placement does not require drilling into the mounting surface.
-
Removable Setup
The mount can be placed and removed for stationary use at a campsite or rest stop.
Aspectos destacados
Magnetic Support and Angle Joint
The bracket view shows the circular feet, central adjustment joint and locking handle. The small roof placement photo is an example.
Secure the Base Adapter
The illustrated sequence shows the adapter fitting into the earlier pipe-adapter base, secured with the base fastener.
Contact Surface
All magnetic feet need full contact with a clean, flat ferromagnetic surface. A glass roof, aluminum panel or fiberglass surface is not a suitable magnetic mounting surface.
Set Up While Parked
Use the mount at a stationary location with a clear view of the sky.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Starlink Mini | Matching earlier pipe-adapter base only. Does not fit the base with three top holes. |
This mount is not for the three-hole base or for use while driving.
Especificaciones
| Tipo de producto | Magnetic adjustable mount |
|---|---|
| Compatible Models | Starlink Mini with matching earlier pipe-adapter base; excludes the base with three top holes |
| Position / Location | Clean, flat ferromagnetic iron surface; stationary setup only |
| Material | Metal bracket with rubberized coating |
| Color | Negro |
| Installation Type | Magnetic surface attachment; secure adapter and adjustment joint first |
| Drilling Required | No drilling into the mounting surface |
| Ajuste | Multi-angle joint with locking handle |
Instalación
- Fit the adapter into the matching base and secure its fastener. Assemble the magnetic holder.
- Place the mount with full foot contact on the clean, flat iron surface. Set the antenna angle and tighten the locking handle.
- Route the cable without pulling.
Conviene saber
Precaución
- Stationary use only.
- Not compatible with the Mini base that has three holes on top.
- Use only a clean, flat ferromagnetic iron surface with full contact for the feet. Glass, aluminum and fiberglass do not provide the required magnetic attachment. A vehicle roof may have several different surface materials.
- Choose a stable location with a clear view of the sky. Secure loose cables.
Cuidado
- Clean grit from the feet and contact surface before each placement. Lift the mount away rather than sliding it across paint.
- The coating is not a guarantee against paint marks or scratches.
Preguntas frecuentes
Can it stay on the roof while driving?
No. This mount is for stationary use only.
Does it fit the Mini base with three top holes?
No. That base is specifically excluded.
Can I attach it to a glass or aluminum roof?
No. The magnetic support needs a suitable flat iron surface. Glass, aluminum and fiberglass do not provide magnetic attachment.
How do I change the angle?
Adjust the central joint to the desired angle, then tighten the locking handle.
Does the coating prevent all paint damage?
No. Grit, movement or an unsuitable surface can leave marks.
English 
German 
Spanish 