Nappa Leather Covers for the Trunk Sides
These Nappa leather side-wall liners cover the exposed felt in the rear cargo area of Model Y Juniper five-seater (2025.03+). Contoured panels with stitched borders attach to the original felt using pre-installed hook-and-loop fasteners.
- Nappa Leather Surface
- Hook-and-Loop Mount
- Cargo Side Walls
- Juniper 5-Seater
Características principales
-
Side-Wall Coverage
Shaped panels cover the exposed felt on the rear cargo side walls.
-
Nappa Leather Surface
A Nappa leather outer finish with stitched borders and a contoured profile.
-
Hook-and-Loop Backing
Pre-installed fasteners on the back attach to the original felt.
-
Five-Seater Application
For the matching Model Y Juniper five-seater cargo layout from 2025.03+.
-
Open Access
Keep cargo-board movement, side storage and required vehicle access openings usable.
-
Surface Care
Wipe with a soft damp cloth, then dry before refitting.
Aspectos destacados
Left Side-Wall Profile
The left-side example follows the cargo-wall contour and surrounding trim, leaving the side storage opening open.
Right Side-Wall Profile
The right-side example shows the shaped liner beside the cargo floor.
Wipe-Clean Outer Surface
Remove grit, wipe the surface with a soft damp cloth and let it dry. No waterproof or stain-proof guarantee is given.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model Y Juniper | 2025.03+ | Five-seater rear cargo side walls. |
Fits the Model Y Juniper five-seater from 2025.03+. Does not fit other seating layouts, older Model Y or Model Y L.
Especificaciones
| Tipo de producto | Nappa leather trunk side mats |
|---|---|
| Compatible Models | Tesla Model Y Juniper 5-seater 2025.03+ |
| Position / Location | Rear trunk side walls over the felt |
| Material | Nappa leather |
| Installation Type | Pre-installed hook-and-loop fasteners on the back |
| Care Instructions | Wipe with a damp cloth |
| Peso del envío | 500 g (1.1 lb) |
Instalación
- Clean and dry the original cargo side felt.
- Align the liner and press its pre-installed hook-and-loop backing onto the felt.
- Keep side storage, vents, anchors, service access and liftgate closure clear.
- Recheck retention after normal use. Remove a liner if it shifts or obstructs any vehicle function; follow the attachment instructions for careful removal.
Conviene saber
Precaución
- The liners are surface coverings, not cargo restraints or impact-rated protection. Secure luggage to the proper vehicle anchors.
Cuidado
- Remove grit and wipe with a soft damp cloth. Dry the liner and original felt before refitting.
Preguntas frecuentes
Is this for the five-seater or seven-seater?
The application is Model Y Juniper five-seater from 2025.03+; no seven-seater fit is specified.
How does it attach?
Pre-installed hook-and-loop fasteners attach to the original felt.
Will cargo-board and compartment access remain clear?
How do I clean the surface?
Remove grit, wipe with a soft damp cloth and let the liner and felt dry before refitting. Clean spills promptly and inspect beneath the panel rather than treating it as a sealed liquid container.
English 
German 
Spanish 