A Rear Cup Holder With Rotating Stowage
Add two cup recesses below the rear console display with this ABS holder for Model 3 Highland from 2024 and Model Y Juniper from 2025. Its cup section rotates toward a stowed position and uses magnetic positioning.
- 2 Cup Recesses
- Rotating Holder
- ABS Construction
Características principales
-
Rear Console Cup Storage
Two cup recesses sit below the rear display and vent area
-
Sideways Stowage
Rotate the empty holder toward its stowed position when the cup recesses are not needed
-
Posicionamiento magnético
A magnetic clasp locates the use and stowed positions.
-
ABS Construction
The holder and surrounding frame are made from ABS plastic
-
Open Display Frame
The frame follows the rear console outline, leaving the display face and original controls accessible.
-
USB Port Openings
Rear port openings provide space for connectors.
Aspectos destacados
Frame And Cup Recesses
The open frame surrounds the rear display area, with two cup recesses below. Shaped to the display outline, vent opening and lower port positions.
Installed Layout
The installed example shows the holder below the rear screen.
Each Container
Choose closed containers that sit securely within the recesses. A tall or wide cup can reduce clearance or overload the mounting; avoid hot drinks and heavy containers.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model 3 Highland | 2024+ | Rear screen surround, vent and lower port layout. |
| Model Y Juniper | 2025+ | Rear screen surround, vent and lower port layout. |
The original screen surface, controls, ventilation and USB connections must remain accessible, with adequate clearance for passengers and seat movement.
Especificaciones
| Tipo de producto | Rotatable rear console cup holder |
|---|---|
| Compatible Models | Model 3 Highland 2024+; Model Y Juniper 2025+, subject to exact rear console profile matching |
| Position / Location | Rear-facing console, below the rear display and vent |
| Material | ABS plastic |
| Installation Type | Adhesive-mounted frame |
| Peso del envío | 250 g (0.55 lb) |
Instalación
- Park the vehicle and test-fit the empty frame and holder.
- Clean and dry only the intended mounting surface using a product compatible with the original trim. Position and press the frame without pressing on the display glass.
- Leave the mounting unloaded for the bond-building period specified for the actual adhesive and conditions. A fixed elapsed time does not indicate full holding strength.
- Use only appropriately fitting closed containers and stop if the mounting moves.
Conviene saber
Precaución
- Use closed drink containers that fit securely, avoid hot liquids and heavy containers, and move or stow the holder only while parked and empty. The holder is not a cargo restraint or a handhold.
- Allow the adhesive to build bond strength before loading the holder.
Cuidado
- Wipe the holder with a damp cloth and dry it; keep spilled liquid away from the rear console electronics.
- Use surface-compatible removal instructions. Avoid excessive heat or prying on the screen and console; adhesive residue or trim marking may occur.
Preguntas frecuentes
How should I stow the cup holder?
While parked, remove every container and rotate the empty cup section toward its stowed position.
Can rear USB cables still be used?
The holder has openings at the lower port positions. Plug size and cable bend affect clearance with the holder fitted.
How long should the adhesive sit?
Follow the instructions for the supplied adhesive and installation conditions. Keep the holder unloaded during bond building; a fixed time is not a tested load rating.
Will removal leave the console untouched?
Adhesive removal can leave residue or mark the trim. Use removal instructions compatible with the original surface, keep heat away from electronics and avoid pulling or prying on the display.
English 
German 
Spanish 