A Carbon Fiber Front Lip for the Model Y Refresh
Give the lower front bumper a woven-carbon finish with this shaped 3K twill carbon-fiber lip. It fits Model Y Juniper 2025+ and Model YL 2026+ with the standard bumper profile, in glossy or matte finish. The projecting shape reduces front clearance.
- Genuine Carbon Fiber
- 3K Twill Weave
- Glossy or Matte
- Juniper & YL
Características principales
-
3K Twill Carbon Fiber
Exposed woven carbon construction forms the front lip.
-
Glossy or Matte
Available in glossy or matte surface finish.
-
Lower Front Profile
The shaped lip follows the lower front bumper and adds projecting end sections.
-
Juniper and YL Versions
Listed for Model Y Juniper 2025+ and Model YL 2026+ with the matching bumper profile.
-
Specific Exclusions
The original Model Y 2020–2024 and Juniper Performance bumper are excluded.
-
Montaje
Correct alignment and fastening are important for a part mounted at the lower bumper.
Aspectos destacados
Follow the Lower Bumper Line
The lip extends across the lower front bumper with shaped end sections.
Woven Carbon and Shaped Ends
Exposed 3K twill carbon fiber continues into the shaped end sections. This construction and visual form do not establish aerodynamic performance.
Front Edge Detail
The lower edge projects ahead of the original bumper surface. Allow for the changed clearance at curbs, ramps and driveways.
Glossy or Matte Finish
Glossy has a brighter sheen; Matte provides a lower-sheen woven-carbon surface.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model Y Juniper | 2025+ | Matching standard bumper profile; Juniper Performance excluded |
| Model YL | 2026+ | Standard front bumper profile |
Fits Model Y Juniper 2025+ and Model YL 2026+. Does not fit Model Y 2020–2024 or Model Y Juniper Performance.
Especificaciones
| Tipo de producto | Carbon fiber front lip splitter |
|---|---|
| Compatible Models | Model Y Juniper (2025+), Model YL (2026+) |
| Position / Location | Front bumper lower edge |
| Material | Genuine carbon fiber, not ABS or vinyl overlay |
| Surface Finish | Glossy or matte |
| Pattern / Weave | 3K twill weave |
Instalación
- Does not fit the original Model Y or Juniper Performance.
- Align the lip and fix it with the mounting points, adhesive and screws given in the product instructions.
- Secure the part using the specified method without covering original lights, cameras, sensors, cooling openings or service access.
- Follow the specified adhesive curing instructions.
Conviene saber
Precaución
- Does not fit Model Y 2020–2024 or Model Y Juniper Performance.
- The lip extends lower than the factory bumper and changes front clearance. Take care around curbs, ramps, driveways and speed bumps.
- No measured downforce, drag reduction or handling improvement is stated.
Cuidado
- Clean the carbon surface with a compatible gentle method; avoid abrasive polishing or scraping.
- Inspect fasteners, adhesive joints and the lower edge for looseness or impact damage. Stop using a loose or damaged lip.
- Take care around steep driveways, ramps, speed bumps and curbs because the lip sits lower than the original bumper.
Preguntas frecuentes
What material and finishes are offered?
The lip is listed as genuine 3K twill carbon fiber, with glossy and matte surface choices.
Which bumper versions are listed?
Model Y Juniper 2025+ and Model YL 2026+ with the matching front bumper profile. Model Y 2020–2024 and Juniper Performance are specifically excluded.
Will the lip change ground clearance?
Yes. It extends lower than the factory bumper, so allow for the changed clearance around curbs, steep driveways, ramps and speed bumps.
Does it provide proven aerodynamic gains?
No measured downforce, drag or handling result is provided for this product. Treat its woven-carbon construction and front profile as product and appearance details.
How is it mounted?
The stated method uses mounting points with adhesive or screws, as set out in the instructions for this lip.
English 
German 
Spanish 