TESVXtesvx.com
Fuente: https://tesvx.com/es/product/starlink-mini-r-foot-armor-case/
0

Reseñas

Todavía no hay reseñasSé el primero en compartir tu experiencia con este producto.

Especificaciones

Tipo de productoR-Foot Armor Case
Vehicle CompatibilityStarlink Mini (SpaceX, 2024 and later)
MaterialLiquid silicone, Shore A 65°
Dimensiones274 × 313 × 42 mm (10.8 × 12.3 × 1.7 in)
PesoApprox. 230 g (0.51 lb)
Grado de impermeabilidadIP65
Temperatura de funcionamiento-30 °C to +80 °C (-22 °F to 176 °F)
Método de instalaciónElastic slip-on fit; ready in under 20 seconds
Contenido del paqueteSilicone case, mission briefing card, recycled paper belly band
Peso del envío285 g (0.63 lb)

Detalles

Silicone Edge and Corner Case for Starlink Mini

Add a flexible silicone surround to the edges and corners of a Starlink Mini. The black case has raised corner feet with orange accents, a broad open antenna face, a trapezoidal rear cutout and narrow slots in the rear panels.

  • Starlink Mini
  • Silicone Case
  • Raised Corners
  • Open Rear Cutout

Características principales

  1. Raised Corners

    Four shaped corner feet extend around the Mini housing corners.

  2. Silicone Construction

    The flexible silicone case stretches over the housing for installation.

  3. Open Antenna Face

    The frame surrounds the edges while leaving the broad antenna face open.

  4. Rear Cutout

    A trapezoidal opening leaves part of the rear housing and base area exposed.

  5. Slotted Rear Panels

    Narrow openings are molded into the panels beside the rear cutout.

  6. Corner Accents

    Orange details outline the raised black corner sections.

Aspectos destacados

Corner and Edge Surround - TESVX Armor Case
Corner and Edge Surround

The product view shows the raised corner sections, surrounding frame and rear cutout. Starlink equipment shown for placement is separate from the case.

Rear Opening and Side Slots

The trapezoidal rear opening and side slots leave areas of the housing exposed.

Flexible Slip-On Fit

Seat the upper corners first, then stretch the lower edge over the housing. Inspect every edge so the case stays seated without pulling on cables or mounting hardware.

The Complete Setup

The open cover does not replace cable seals, equipment restraint or proper ventilation.

Compatibilidad

Modelo Years / Version Notas
Starlink Mini 2024+ Case for the Mini housing.

For the Starlink Mini housing shape shown. The cover is not a universal mount adapter.

Especificaciones

Tipo de producto Silicone corner and edge armor case
Compatible Models Starlink Mini (2024+)
Position / Location Around the Mini housing edges and corners
Material Liquid silicone
Color Black with orange corner accents
Dimensiones 274 × 313 × 42 mm (10.8 × 12.3 × 1.7 in)
Installation Type Elastic slip-on fit
Rear Opening Trapezoidal cutout, 105 × 195 mm

What's in the Box

  • 1×Silicone armor case
  • 1×Information card
  • 1×Recycled paper belly band

Instalación

Difficulty
Easy
Herramientas
No tools for the slip-on case
  1. Disconnect power and remove cables or mounting accessories as needed to avoid pulling on them while fitting.
  2. Seat the top two housing corners into the upper case corners, then stretch the bottom edge over the lower corners.
  3. Seat all case edges, keeping the broad antenna face and openings clear.
  4. Reconnect the correct cables without strain.

Conviene saber

Precaución
  • Do not force a case that lifts, distorts or prevents the original base from seating.
  • Keep the antenna face, DC power connection, Ethernet connection and status indicator accessible.
  • The case covers portions of the housing; unchanged cooling or radio performance is not claimed.
  • The open case does not create a waterproof seal or replace correctly fitted cables and port seals. Follow the Mini instructions and protect exposed connections.
  • Avoid deliberate drop testing. Secure the Mini during transport and outdoor use; a silicone case does not guarantee the device survives a drop or impact.
Cuidado
  • Remove dirt and moisture trapped between the case and housing. Clean the detached case with a compatible mild cleaner and let it dry before refitting.
  • Inspect corners and edges for tearing or deformation. Replace a case that will not stay seated or interferes with the device or mount.

Preguntas frecuentes

Does it guarantee protection from a drop?

No. The case adds silicone around the corners and edges.

Does it make the Mini waterproof?

No. The case has an open antenna face, rear cutout and slots. Use the correct device cables and seals and keep exposed connections protected.

Will cooling stay the same?

The case covers portions of the housing; unchanged cooling or radio performance is not claimed.

What comes in the box?

The listed package includes one silicone case, one information card and one recycled paper belly band. The Starlink Mini and mounting accessories are separate.

Recomendados

Seleccionar especificaciones

Entrega

Se envía en 1-3 días laborables

Free shipping on eligible orders of US$149 or more

Métodos de pago

  • PayPalPayPal
  • Tarjetas de débito y créditoVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Los métodos disponibles pueden variar según la moneda y el país de facturación; la lista definitiva se muestra al finalizar la compra.

Servicio

  • Pago seguro

    Los pagos se procesan a través de una conexión cifrada.

  • Asistencia posventa

    Contacta con nosotros si tienes dudas sobre la instalación o el uso.

Especificaciones

Tipo de producto
R-Foot Armor Case
Vehicle Compatibility
Starlink Mini (SpaceX, 2024 and later)
Material
Liquid silicone, Shore A 65°
Dimensiones
274 × 313 × 42 mm (10.8 × 12.3 × 1.7 in)
Peso
Approx. 230 g (0.51 lb)
Grado de impermeabilidad
IP65
Temperatura de funcionamiento
-30 °C to +80 °C (-22 °F to 176 °F)
Método de instalación
Elastic slip-on fit; ready in under 20 seconds
Contenido del paquete
Silicone case, mission briefing card, recycled paper belly band
Peso del envío
285 g (0.63 lb)

Escribe una reseña

R-Foot Liquid Silicone Armor Case with Slip-On Fit for Starlink Mini
Valoración general *
¿Qué destacarías?opcional, hasta 3
Añadir fotos0 / 5
JPG, PNG o WebP, hasta 5 MB cada uno.

Las reseñas se revisan antes de publicarse. La etiqueta Compra verificada se añade automáticamente cuando tu correo electrónico coincide con el de un pedido.

TESVX product image
R-Foot Liquid Silicone Armor Case with Slip-On Fit for Starlink Mini

US$32.99

Añadir al carrito