A Rechargeable Inflator for Tires and Small Inflatables
This portable pump offers four described inflation modes for cars, bicycles, motorcycles and balls, automatic stopping at the selected pressure and a top-mounted LED light. The listing gives an air output of 38 L/min, with stated limits of 75 psi for car tires and 150 psi for bicycles. These limits are not inflation targets.
- Rechargeable
- 4 Modes
- Auto Stop
- LED Light
Key Features
-
Portable Operation
The rechargeable pump can be used without a vehicle-specific installation.
-
Four Inflation Modes
The listing specifies car, bicycle, motorcycle and ball modes.
-
Automatic Stop
The pump is described as stopping at the selected pressure.
-
Nozzle Choices
Five nozzle types are described for different valves and inflatables.
-
LED Light
A top-mounted LED is provided for illumination near the pump. It does not replace choosing a suitable place away from moving traffic.
-
Optional Car Cord
The source describes a 5 m vehicle power cord as optional; it is not supplied.
Highlights
Complete Pump Assembly
The full product photo shows the pump display and controls beside the power component. Follow the actual unit instructions for operation and charging, and use a charger that matches the specified input.
Choose the Mode and Pressure
Select a mode, pressure unit and target for the item being inflated. For vehicle tires, the target is the cold pressure on the vehicle placard, not a pump preset or sidewall maximum.
Nozzles and Power Cord
Five nozzles cover different valves. The 5 m car power cord is optional.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Suitable valves and pressure requirements | Cars, bicycles, motorcycles, balls and the described air-bed adapter use; compatibility depends on the actual valve and item rating. |
This is portable equipment rather than a vehicle-specific fitted part. The listing’s pressure limits do not establish compatibility with every RV tire, high-volume inflatable or vehicle accessory socket.
Specifications
| Product Type | Portable rechargeable inflator |
|---|---|
| Compatible Models | Tires, bicycles, motorcycles and balls with suitable valves and pressure requirements |
| Capacity | Listed air output: 38 L/min |
| Power | Rechargeable operation; compatible 5 m car power cord is optional |
| Connector Type | Five described nozzle types: ball needle, long, short, French valve and British bicycle valve |
| Lighting Modes | Top-mounted LED light |
| Control Method | Four inflation modes and automatic stop at the selected pressure |
| Package Contents | Pump and described inflation nozzles/adapter; optional car cord excluded |
| Maximum Pressure | Listed limits: 75 psi for car tires; 150 psi for bicycles |
What's in the Box
- 1×Portable rechargeable inflator
- Described inflation nozzles and air-bed adapter
- Optional 5 m car power cord is not included in this listing’s stated base package
Installation
- For vehicle tires, the target is the cold pressure on the vehicle placard.
- Attach the nozzle or adapter securely to the valve. Select the mode, pressure unit and target.
- Start inflation and supervise it. Stop if the connection leaks or operation is abnormal; follow the unit instructions for duty cycle and cooling.
- After automatic stopping, switch off, disconnect and replace the valve cap where applicable.
Good to Know
Caution
- For vehicle tires, use the cold pressure on the vehicle placard. The sidewall maximum and pump maximum are not inflation targets.
- Supervise operation and follow the actual pump instructions for running, cooling and charging. Use only a compatible charger or optional vehicle cord matched to its input rating.
- A pump does not repair a puncture or make a damaged tire serviceable. Stop if the equipment is damaged, the connection leaks or the tire shows damage; arrange proper inspection.
Care
- Keep the pump and connectors clean and dry, and store them away from heat after cooling. Follow the actual battery charging and storage instructions.
- A persistent tire leak or damage needs repair, rather than repeated pumping alone.
FAQ
Is the car power cord included?
No. The 5 m car power cord is described as optional.
Are 75 psi and 150 psi tire-pressure targets?
No. They are listed pump limits for car-tire and bicycle uses, not inflation targets.
Does it stop automatically?
Yes. It is described as stopping at the selected pressure.
Which nozzles are described?
A ball needle, long nozzle, short nozzle, French-valve nozzle and British-bicycle-valve nozzle are listed, along with an air-bed adapter use.
Does pumping repair a puncture?
No. A punctured or damaged tire needs proper inspection and repair; adding air does not make it serviceable.
English 
German 
Spanish 