Power Your Starlink Gen 2 from 12V or 24V DC
This all-in-one Starlink Gen 2 PoE injector and DC converter simplifies your mobile Starlink setup for RVs, campers and off-grid use. It powers the dish directly from a 9-36V DC source, so you do not need a bulky AC inverter. A DC step-up converter, PoE injector and power supply are combined in a single compact unit.
- 5-in-1 Design
- 9-36V DC Input
- Gigabit Ethernet
- DC Conversion
- Plug & Play
Key Features
-
5-in-1 Integrated Design
A PoE injector, DC step-up converter and power supply combine in one device to save space
-
Wide 9-36V DC Input
Connects directly to DC sources including 12V and 24V vehicle batteries for mobile and off-grid use
-
Gigabit Ethernet
Supports 10/100/1000 Mbps Ethernet; internet speed depends on the Starlink service and network
-
Protection Features
Source lists surge, ESD, over-voltage and over-current protection
-
Plug-and-Play Setup
Integrates with your existing Starlink Gen 2 cable for a quick, simple connection
-
Compact RV Power Solution
A single unit gives a streamlined, clutter-free power setup for RVs and campers
Highlights
No AC Inverter Needed
Wide 9-36V DC input connects directly to a range of DC power sources, including 12V and 24V vehicle batteries, which suits mobile and off-grid applications.
Everything in One Compact Unit
A PoE injector, DC step-up converter and power supply are combined in a single device, streamlining your setup and saving space for a clutter-free power solution.
Gigabit Ethernet Interface
The Ethernet interface supports 10/100/1000 Mbps. This is the interface rating, not a guarantee of Starlink internet speed or connection stability.
Built-In Protection
The source lists surge, ESD, over-voltage and over-current protection.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Starlink Gen 2 | Works with your existing Starlink Gen 2 cable |
For Starlink Gen 2 Standard Actuated hardware as shown in the source compatibility image. Does not fit other Starlink generations or Performance terminals.
Specifications
| Product Type | 5-in-1 PoE injector and DC power converter |
|---|---|
| Compatible Models | Starlink Gen 2 |
| Connectivity | 10/100/1000 Mbps Ethernet |
| Ports | Gigabit Ethernet (10/100/1000M) |
| Input | DC 9–36V; source product image specifies minimum input power of 180 W |
| Installation Type | Plug and play with the existing Starlink Gen 2 cable |
| Protection Features | Built-in surge, ESD, over-voltage and over-current protection |
Installation
Good to Know
Caution
- For use with Starlink Gen 2 only.
- Connect only to a DC source within 9-36V.
- The source specification image lists a minimum 180 W DC input supply.
FAQ
Do I need an inverter to power my Starlink Gen 2 dish?
No. The injector powers the dish directly from a 9-36V DC source, which removes the need for a bulky AC inverter.
Which power sources can I connect?
It connects to a wide range of DC power sources, including 12V and 24V vehicle batteries.
How fast is the Ethernet connection?
The Ethernet interface supports 10/100/1000 Mbps. Actual internet speed depends on your Starlink service and network conditions.
What protections are built in?
Built-in safeguards include surge, ESD, over-voltage and over-current protection.
English 
German 
Spanish 