Adjustable Roof and Wall Mount for Starlink Standard Gen 3
This stainless steel mount supports a Starlink Standard Gen 3 rectangular antenna from a suitable building roof or wall. Choose a bent or straight pole kit. The base pivots to set the pole angle, and the dish bracket secures to the pole with setting screws.
- Standard Gen 3
- Stainless Steel
- Bent or Straight Pole
- Adjustable Base
Key Features
-
Standard Gen 3 Interface
The dish bracket is shaped for the Starlink Standard Gen 3 rectangular antenna.
-
Bent or Straight Pole
Choose the pole shape suited to the mounting position; the two kits are separate options.
-
Stainless Steel Construction
The mount combines a steel pole, dish bracket and adjustable mounting base.
-
Adjustable Base
The base has a pivot and curved adjustment slots for setting the pole angle before tightening.
-
Dish Bracket Fastening
The dish bracket attaches to the pole with six setting screws.
-
Roof or Wall Placement
The kit is intended for a suitable building roof or wall with appropriate structural anchoring.
-
Supplied Hardware
The kit includes mounting fasteners and hand tools; select anchors and weather sealing to suit the actual surface.
Highlights
Choose One Pole Kit
The straight pole and bent pole examples show the two available kit shapes. Choose the configuration that provides the required clearance at your mounting location; the antenna is separate.
Straight-Pole Dimensions
The straight pole measures approximately 15.55 inches long with a 1.5-inch diameter. The dish bracket plate is approximately 7.09 × 5.12 inches, and the adjustable base approximately 7.09 × 4.72 inches. These measurements do not define the bent pole’s installed height.
Set the Base and Dish Position
The pivot and curved base slots allow angle adjustment before fastening. Changing the bracket angle alone does not guarantee a clear connection.
Bent-Kit Hardware Example
The bent-kit layout shows the pole, dish bracket, adjustable base, setting screws, mounting fasteners, wrench and hex key. Additional anchors or weather sealing for the wall or roof structure are not included.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Starlink Standard Gen 3 | Rectangular antenna with matching bracket interface; selected bent or straight kit. |
Fits Starlink Standard Gen 3 only. Does not fit Mini, Standard Actuated or Performance antennas. Bent and straight pole kits are separate options.
Specifications
| Product Type | Adjustable roof and wall mount kit (V4) |
|---|---|
| Compatible Models | Starlink Standard Gen 3 rectangular dish |
| Position / Location | Suitable building roof or wall |
| Material | Stainless steel |
| Dimensions | Straight pole: approx. 39.5 cm (15.55 in) long, 3.8 cm (1.5 in) diameter; dish bracket plate: approx. 18 × 13 cm; adjustable base: approx. 18 × 12 cm |
| Installation Type | Bolted base with pivot adjustment and screw-secured dish bracket |
| Package Contents | Selected pole, dish bracket, adjustable mounting base, fasteners, wrench and hex key |
| Shipping Weight | 2 kg (4.4 lb) |
What's in the Box
- Pole in the selected bent or straight kit
- Dish bracket and adjustable mounting base
- Mounting fasteners
- Wrench and hex key
Installation
- Assess the structural mounting surface, antenna clearance and sky view before drilling.
- Follow the selected kit’s instructions to assemble the base pivot and adjustment bolts, then anchor the base using fixings suitable for the substrate. Weather-seal penetrations as required.
- Attach the dish bracket to the pole and secure its six setting screws. Fit the antenna and route its cable without strain.
- Set the alignment, then secure the adjustment fasteners.
Good to Know
Caution
- Use a structurally suitable mounting surface and anchors rated for the actual substrate and combined load. Supplied fasteners are not a universal roof or wall solution.
- The Starlink antenna is separate. This mount does not guarantee an unobstructed sky view, network speed or uninterrupted service.
FAQ
Which Starlink antenna is this for?
The Starlink Standard Gen 3 rectangular antenna with a matching mounting interface. Mini, Standard Actuated and Performance antennas need their own matching mount.
Are both pole shapes supplied together?
No. Bent Pole Kit and Straight Pole Kit are separate selections.
Do the included screws fit every roof or wall?
No. Anchoring and sealing depend on the structure, surface material and load.
Will the mount improve speed or prevent interruptions?
A suitable position can provide a clearer sky view, but the mount does not guarantee speed or continuous service. Use the Starlink app to assess obstructions and alignment.
English 
German 
Spanish 