Two Cabin Filters for Your Next Service
Replace the upper and lower cabin filter elements with this two-piece aftermarket set. Pleated media and an activated carbon layer are packaged together for the listed Model 3, Model Y and Model YL applications.
- 2 Filters
- Upper + Lower
- Activated Carbon
- Aftermarket Replacement
Key Features
-
Two-filter set
includes an upper and a lower cabin filter
-
Pleated media
replacement elements for the cabin ventilation filter housing
-
Activated carbon layer
carbon-containing media within the replacement filters
-
Model 3 and Model Y applications
fits the listed Model 3, Model Y and Model YL generations
-
Aftermarket replacement
replaces the cabin filter elements without replacing the housing
-
Service as a pair
change the upper and lower elements together using the vehicle procedure
Highlights
Upper and Lower Elements Together
The set contains both cabin filter elements, so the pair can be replaced during the same service. The rectangular pleated filters shown are for the cabin filter housing.
Pleated Media With Activated Carbon
The filter construction combines pleated media with an activated carbon layer. Fit the elements in the correct direction using the markings and vehicle service instructions.
Cabin Filter Housing
Cabin filter replacement is separate from servicing any underhood HEPA assembly fitted to the vehicle.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 | 2017–2023.10 | |
| Model 3 Highland | 2024+ | |
| Model Y | 2020–2025.03 | |
| Model Y Juniper | 2025+ | |
| Model YL | 2026+ |
Fits Model 3 2017–2023.10, Model 3 Highland 2024+, Model Y 2020–2025.03, Model Y Juniper 2025+ and Model YL 2026+. This set is not an underhood HEPA assembly replacement.
Specifications
| Product Type | Aftermarket cabin air filter set |
|---|---|
| Compatible Models | Model 3 2017–2023.10; Model 3 Highland 2024+; Model Y 2020–2025.03; Model Y Juniper 2025+; Model YL 2026+ |
| Quantity | 2 filters (upper and lower) |
| Filter Construction | Pleated filter media with activated carbon layer |
What's in the Box
- 1×Upper cabin air filter
- 1×Lower cabin air filter
Installation
- Turn off climate control and access the cabin filter housing.
- Remove the old upper and lower elements.
- Install both new filters in the prescribed order and direction, then refit the housing cover and trim.
Good to Know
Caution
- This aftermarket set replaces the two cabin filters; it does not include the separate underhood HEPA filter assembly on equipped vehicles.
- Follow the filter direction markings.
Care
- Follow the maintenance schedule for your vehicle and region, taking driving conditions into account.
FAQ
Does this replace all the vehicle air filters?
It contains the upper and lower cabin filters only. A separate underhood HEPA assembly, where equipped, is not included.
Is this a Tesla original part?
No. This is an aftermarket replacement set.
When should I replace the pair?
Follow your vehicle and region-specific maintenance schedule. Replacement needs also depend on the conditions in which you drive.
English 
German 
Spanish 