Silicone Edge and Corner Case for Starlink Mini
Add a flexible silicone surround to the edges and corners of a Starlink Mini. The black case has raised corner feet with orange accents, a broad open antenna face, a trapezoidal rear cutout and narrow slots in the rear panels.
- Starlink Mini
- Silicone Case
- Raised Corners
- Open Rear Cutout
Key Features
-
Raised Corners
Four shaped corner feet extend around the Mini housing corners.
-
Silicone Construction
The flexible silicone case stretches over the housing for installation.
-
Open Antenna Face
The frame surrounds the edges while leaving the broad antenna face open.
-
Rear Cutout
A trapezoidal opening leaves part of the rear housing and base area exposed.
-
Slotted Rear Panels
Narrow openings are molded into the panels beside the rear cutout.
-
Corner Accents
Orange details outline the raised black corner sections.
Highlights
Corner and Edge Surround
The product view shows the raised corner sections, surrounding frame and rear cutout. Starlink equipment shown for placement is separate from the case.
Rear Opening and Side Slots
The trapezoidal rear opening and side slots leave areas of the housing exposed.
Flexible Slip-On Fit
Seat the upper corners first, then stretch the lower edge over the housing. Inspect every edge so the case stays seated without pulling on cables or mounting hardware.
The Complete Setup
The open cover does not replace cable seals, equipment restraint or proper ventilation.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Starlink Mini | 2024+ | Case for the Mini housing. |
For the Starlink Mini housing shape shown. The cover is not a universal mount adapter.
Specifications
| Product Type | Silicone corner and edge armor case |
|---|---|
| Compatible Models | Starlink Mini (2024+) |
| Position / Location | Around the Mini housing edges and corners |
| Material | Liquid silicone |
| Color | Black with orange corner accents |
| Dimensions | 274 × 313 × 42 mm (10.8 × 12.3 × 1.7 in) |
| Installation Type | Elastic slip-on fit |
| Rear Opening | Trapezoidal cutout, 105 × 195 mm |
What's in the Box
- 1×Silicone armor case
- 1×Information card
- 1×Recycled paper belly band
Installation
- Disconnect power and remove cables or mounting accessories as needed to avoid pulling on them while fitting.
- Seat the top two housing corners into the upper case corners, then stretch the bottom edge over the lower corners.
- Seat all case edges, keeping the broad antenna face and openings clear.
- Reconnect the correct cables without strain.
Good to Know
Caution
- Do not force a case that lifts, distorts or prevents the original base from seating.
- Keep the antenna face, DC power connection, Ethernet connection and status indicator accessible.
- The case covers portions of the housing; unchanged cooling or radio performance is not claimed.
- The open case does not create a waterproof seal or replace correctly fitted cables and port seals. Follow the Mini instructions and protect exposed connections.
- Avoid deliberate drop testing. Secure the Mini during transport and outdoor use; a silicone case does not guarantee the device survives a drop or impact.
Care
- Remove dirt and moisture trapped between the case and housing. Clean the detached case with a compatible mild cleaner and let it dry before refitting.
- Inspect corners and edges for tearing or deformation. Replace a case that will not stay seated or interferes with the device or mount.
FAQ
Does it guarantee protection from a drop?
No. The case adds silicone around the corners and edges.
Does it make the Mini waterproof?
No. The case has an open antenna face, rear cutout and slots. Use the correct device cables and seals and keep exposed connections protected.
Will cooling stay the same?
The case covers portions of the housing; unchanged cooling or radio performance is not claimed.
What comes in the box?
The listed package includes one silicone case, one information card and one recycled paper belly band. The Starlink Mini and mounting accessories are separate.
English 
German 
Spanish 