A Matte Black Finish for the Door Stop Arm Mounts
These ABS covers clip over the exposed mounting area at the door stop arm pivot. The open contour fits around the arm, and the textured matte black finish tidies the visible hardware. Choose the two-piece Model 3 option or four-piece Model Y / YL option.
- Matte Black ABS
- Tool-Free Snap-On
- Model 3 / Y / YL
- 2 or 4 Pieces
Key Features
-
Mounting-Area Coverage
These contoured covers sit over the door stop arm pivot mounting area while leaving an opening around the arm.
-
Matte Black Finish
A textured black surface gives the covered mounting hardware a tidy appearance.
-
ABS Construction
The molded ABS shell has an open contour around the stop arm and a textured matte black finish.
-
Clip-On Attachment
Internal retaining clips attach the covers without adhesive or drilling.
-
Two Model Groups
Choose the two-piece Model 3 / Highland option or the four-piece Model Y / Juniper / YL option.
-
Removable Covers
The clips release for access to the door stop mechanism.
Highlights
Cover the Mounting Area
The contoured shell sits around the door stop arm pivot mount, with the opening clear of the moving arm.
Matte Black ABS
A textured matte black surface provides a tidy finish over the mounting hardware. The cover is a trim accessory; it does not replace door stop maintenance.
Clips Instead of Adhesive
Internal retaining tabs hold the cover in place. Align the opening around the arm and press gently until the cover is seated.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 | 2017–October 2023 | 2-piece option. |
| Model 3 Highland | 2024+ | 2-piece Model 3 / Highland option. |
| Model Y | 2020–March 2025 | 4-piece option. |
| Model Y Juniper | 2025+ | 4-piece Model Y / Juniper / YL option. |
| Model YL | 2026+ | 4-piece Model Y / Juniper / YL option. |
Model 3 and Highland use the 2-piece option; Model Y, Juniper and YL use the 4-piece option.
Specifications
| Product Type | Door stop arm protective covers |
|---|---|
| Compatible Models | Model 3 2017–2023.10 and Highland 2024+ (2 pcs); Model Y 2020–2025.03, Juniper 2025+ and Model YL 2026+ (4 pcs) |
| Position / Location | Door stop arm pivot mounting area |
| Material | ABS plastic |
| Surface Finish | Textured matte black |
| Quantity | 2 pieces: Model 3 / Highland; 4 pieces: Model Y / Juniper / YL |
| Installation Type | Tool-free snap-on with internal clips; no adhesive |
| Shipping Weight | 2-piece option: 80 g (2.82 oz); 4-piece option: 160 g (5.64 oz); shipping weight, not measured cover weight |
What's in the Box
- Model 3 / 3 Highland option: 2 door stop arm covers.
- Model Y / Y Juniper / YL option: 4 door stop arm covers.
Installation
- Open the door fully.
- Orient each cover over the pivot mount; the mounting hardware stays in place.
- Align the open contour around the arm and press gently until the retaining clips seat.
- Slowly open and close the door through its normal travel.
Good to Know
Care
- Wipe the cover clean with a soft damp cloth and dry it.
- The cover is not a watertight seal or corrosion-proof barrier.
- Release the clips gently for inspection or service; avoid prying against painted surfaces or forcing a stuck cover.
FAQ
How many covers are included?
The Model 3 / 3 Highland option includes two covers. The Model Y / Y Juniper / YL option includes four covers.
Do I need adhesive or drilling?
No. The covers attach with internal clips.
Will they prevent corrosion?
No. They cover the visible mounting area but are not a corrosion or weather seal.
English 
German 
Spanish 