Silicone Insert for the Front Console Cup Holder
Add a removable silicone liner to the front center-console cup holder of your Model 3 or pre-Juniper Model Y. Two shaped wells help position suitable drinks, while a small central section keeps compact items together. The insert drops into the original cup holder and lifts out for cleaning.
- Flexible Silicone
- Two Cup Wells
- Drop-In Insert
- Washable
Key Features
-
Front Console Insert
The removable insert sits in the original center-console cup holder.
-
Two Cup Wells
The shaped wells and flexible inner supports help position suitable cups and bottles.
-
Silicone Construction
Soft, flexible silicone provides a cushioned contact surface.
-
Small Central Section
A narrow space between the wells can hold suitably sized small items or loose change.
-
Washable Design
Lift out and wash with water and mild detergent, then air dry fully.
-
Drop-In Placement
Place the insert directly in the matching cup holder without fastening tools.
Highlights
Two Shaped Cup Wells
Flexible supports inside the two wells help position suitable cups and bottles. The insert does not hold every bottle size.
Small-Item Section
The narrow central area provides a place for appropriately sized small items or loose change.
Lift Out for Cleaning
Remove the insert to wash with water and mild detergent, then let it air dry fully. Clean spills promptly and keep the original console dry.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 | 2017–August 2023 | Original generation; front console cup holder. |
| Model Y | 2020–March 2025 | Pre-Juniper; front console cup holder. |
Does not fit Model 3 Highland, Model Y Juniper or Model YL.
Specifications
| Product Type | Center-console cup holder insert |
|---|---|
| Compatible Models | Model 3 2017–August 2023; Model Y 2020–March 2025 (pre-Juniper) |
| Position / Location | Front center-console cup holder |
| Material | Flexible silicone |
| Color | Black |
| Quantity | 1 insert |
| Installation Type | Removable drop-in placement |
| Care Instructions | Wash with water and mild detergent; air dry |
| Shipping Weight | 274 g (0.60 lb), listed shipping weight |
What's in the Box
- 1×Silicone center-console cup holder insert
Installation
- Park and remove cups and loose items from the original front console cup holder.
- Clean and dry the cup holder, then place the insert in the matching orientation without forcing it.
- Place a cup or bottle in each well.
Good to Know
Caution
- The insert does not prevent all spills or hold every bottle size.
Care
- Remove the insert to wash with water and mild detergent; air dry fully before replacing.
- Clean spills promptly and keep moisture away from console electronics. Avoid aggressive solvents or excessive heat.
FAQ
Which console and vehicle does this fit?
It is for the front center-console cup holder in the specified Model 3 2017–August 2023 and pre-Juniper Model Y 2020–March 2025 ranges. It does not fit the rear armrest cup holder.
Will any large bottle fit?
Container fit depends on its base diameter, height and shape. Use a bottle that sits securely in the actual well without obstructing nearby controls. A specific supported diameter range is not provided.
Does it guarantee no spills or rattling?
No. The flexible supports steady a container and cushion contact; spills and noise still depend on the container, load and driving conditions.
What is included and how do I clean it?
One silicone insert is included. Cups, bottles and other belongings are not supplied. Lift it out to wash with water and mild detergent, then air dry before replacing.
English 
German 
Spanish 