A Retractable Sunshade for the Juniper Roof
Shade the Model Y Juniper glass roof with manually retractable fabric sections. Built-in handles let you change the covered area, and an aluminum alloy frame supports the shade. Magnetic mounting uses the roof attachment points.
- Manual Retraction
- Built-in Handles
- Aluminum Frame
- Magnetic Mounting
Key Features
-
Manual Retraction
Built-in handles move the shade sections under the roof glass
-
Open or Covered
Move the sections to change how much of the glass-roof area is shaded
-
Fabric Shade
Fabric panels with a silver coating provide coverage under the glass
-
Frame Structure
An aluminum alloy frame supports the retractable layout
-
Magnetic Mounting
Attach only at the intended matching points specified for the selected roof
-
Juniper Application
Shaped to the Juniper roof outline and mounting locations
Highlights
Shade Sections in the Covered Position
The installation illustration shows the sections covering the glass-roof area. This is a shade under the glass; cabin temperature still depends on sunlight, weather and vehicle climate control.
Move the Built-in Handle
The operation illustration shows a handle moving a shade section to reveal part of the roof glass. Set the shade position while parked rather than reaching overhead while driving.
Change the Covered Area
The open-position illustration shows the gap between the shade sections.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model Y Juniper | Match roof outline, intended attachment points and front-console clearances |
Fits the Model Y Juniper glass roof. For vehicles equipped with cabin radar, Tesla identifies its position above the front-row dome lights.
Specifications
| Product Type | Manual retractable glass-roof sunshade with built-in handles |
|---|---|
| Compatible Models | Tesla Model Y Juniper, with matching roof shape and mounting points |
| Position / Location | Under the glass roof; preserve roof-console and sensing clearances |
| Material | Fabric shade with silver coating and aluminum alloy frame |
| Installation Type | Magnetic mounting at the intended matching roof attachment points |
| Care Instructions | Damp cloth, mild soap if needed; air dry before retracting |
Installation
- Fit the frame and magnetic attachments only at the specified matching points without forcing headliner trim or covering sensing regions.
Good to Know
Caution
- Follow the fitting guide for the exact mounting points. Do not attach magnets arbitrarily to headliner trim, pillar airbag areas, wiring or the front roof console.
- If the vehicle has cabin radar, keep the area above the front-row dome lights unobstructed by the frame, magnets or fabric, even when the lights and shade appear to operate normally.
Care
- Wipe gently with a damp cloth; use a mild soap solution for stubborn marks, then wipe clean.
- Allow the shade to air dry completely before retracting.
FAQ
How do I change the shade position?
Move the built-in handles while the vehicle is parked. The handles move the shade sections under the glass.
Does the shade open the roof glass?
The illustrated movement changes the fabric coverage under the glass. It does not move or modify the roof glass.
Does shading replace the vehicle climate control?
The shade changes coverage under the roof glass. Cabin temperature still depends on sunlight and weather; use the vehicle climate control as needed.
Where should I fit the magnetic mounting parts?
At the mounting points shown in the fitting guide, away from the area above the front-row dome lights.
English 
German 
Spanish 