Dry Carbon Fiber Extended Upper Door Panel Overlays with Twill & Plain Weave Options for Tesla Model Y Juniper

Dry Carbon Fiber for the Upper Door Panels

These dry-carbon-fiber overlays follow the extended upper door-trim surfaces on Model Y Juniper and Model YL. Choose a two-piece front-door set or a four-piece front-and-rear set, then select the offered finish and texture combination. The overlays attach to the factory trim with pre-applied adhesive strips.

Dry Carbon Fiber
3 Finishes
Twill or Plain Weave
Front or 4-Door Set

Key Features

Upper-Door Coverage

These dry-carbon-fiber overlays follow the extended upper door-trim surfaces rather than the dashboard.
Front Or Four-Door Set

Select two pieces for the front doors, or four pieces for the front and rear doors.
Finish Choices

Matte, Glossy and Glossy Forged are offered as separate finish selections.
Pattern Choices

The selector pairs each finish with Twill Weave or Plain Weave.
Adhesive Attachment

Pre-applied adhesive strips attach the overlays to the existing trim after cleaning and alignment.
Original Lighting Clearance

Dry-fit the edges to keep the original ambient-light strip, release controls and window functions unobstructed.

Highlights

Extended Upper-Door Trim - TESVX Door Panel Overlays — Extended Upper-Door Trim

The installed example shows the overlay following the upper door panel above the armrest and release-handle area. This kit covers door trim; the vehicle, ambient lighting and surrounding controls remain the original equipment.

Check the Edge and Light Strip - TESVX Door Panel Overlays — Edge and Light Strip

The contour detail shows the overlay edge beside the ambient-light strip, leaving the original light strip and door releases unobstructed.

Matte Plain-Weave Example - TESVX Door Panel Overlays — Matte Plain-Weave Example

This example illustrates the matte plain-weave selection. Choose the actual finish-and-texture pairing in the selector; woven carbon and an irregular forged appearance are different visual treatments.

Front Pair or Four-Door Set

The front-door selection contains two overlays, while the front-and-rear selection contains four. Match each shaped piece to the correct door during the dry-fit before exposing its adhesive.

Compatibility

Model	Years / Version	Notes
Model Y Juniper	2025+	Front doors or front and rear doors
Model YL	2026+	Front doors or front and rear doors

Fits Model Y Juniper (2025+) and Model YL (2026+) upper door profiles. Does not fit older Model Y or Model 3.

Specifications

Product Type	Dry carbon fiber full upper oversized extended door panel overlays
Compatible Models	Model Y Juniper (2025+), Model YL (2026+)
Position / Location	Upper door panels, front doors or front and rear doors
Material	Dry carbon fiber
Surface Finish	Matte, glossy or glossy forged
Pattern / Weave	Twill Weave or Plain Weave selection; select together with finish
Quantity	2 pieces (front doors) or 4 pieces (front and rear doors)
Installation Type	Pre-applied adhesive strips on the existing upper door trim
Package Contents	2 front-door overlays or 4 front-and-rear overlays, with pre-applied adhesive strips

What's in the Box

2×Front-door overlay (front-door set) or 4 x Front-and-rear-door overlay (four-door set)
Pre-applied adhesive strips on the overlays

Installation

Difficulty: Easy

Clean and dry the original trim using a cleaner compatible with its finish and the supplied adhesive; keep cleaner away from switches and light strips.
Dry-fit each overlay on its door.
Remove the adhesive backing, align the overlay and press firmly for 30–60 seconds.

Good to Know

Caution

Keep installation cleaner and adhesive away from electrical parts and moving mechanisms.
Bonding conditions depend on the supplied adhesive and surface. The pressing interval is not a guarantee of complete curing, damage-free removal or permanent attachment.