Slatted ABS Trim for the Front Bumper
Add a finned outline to the front bumper lamp housings of Model Y Juniper (2025+) or Model YL. These left and right ABS trim covers use pre-applied 3M automotive adhesive tape, with no drilling or wiring. Choose glossy or matte carbon fiber texture, or glossy or matte black.
- ABS
- Peel & Stick
- No Drilling
- 4 Finishes
Key Features
-
Slatted Front Bumper Trim
Left and right decorative covers add a finned outline around the front bumper lamp housings
-
ABS Construction
The covers are made of ABS polymer
-
Peel-And-Stick Install
Pre-applied 3M automotive adhesive tape means no drilling and no wiring
-
Four Finishes
Choose glossy or matte carbon fiber texture, or glossy or matte black
-
Install Helpers Included
The kit includes adhesion promoter wipes, an alignment guide card and a microfiber cloth
-
Left And Right Pair
Two covers are included, one for each side
Highlights
A Finned Front-Corner Outline
The slatted covers add a decorative outline around the bumper lamp housings. They are trim pieces and do not include replacement lights.
ABS with Carbon Fiber Texture
Glossy and matte carbon fiber texture options provide the patterned appearance on ABS, rather than a carbon fiber structural part.
Plain Black Alternatives
Glossy black and matte black options provide a plain finish. Select the finish when ordering; a left and right cover are included.
Tape and Installation Helpers
The kit includes pre-applied 3M adhesive tape, two adhesion promoter wipes, one alignment guide card and one microfiber cleaning cloth.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model Y Juniper | 2025+ | Front bumper fog light housings |
| Model YL | Front bumper fog light housings |
Fits the front bumper fog light housings of Model Y Juniper 2025+ and Model YL. These decorative covers do not include lights.
Specifications
| Product Type | ABS fog light housing cover, front bumper trim |
|---|---|
| Compatible Models | Model Y Juniper (2025+), Model YL |
| Position / Location | Front bumper fog light housings, left and right |
| Material | ABS polymer |
| Surface Finish | Glossy or matte |
| Pattern / Weave | Carbon fiber texture or plain black |
| Quantity | 2 pieces (left and right) |
| Installation Type | Peel and stick with pre-applied 3M automotive adhesive tape |
| Drilling Required | No |
| Package Contents | 2 ABS fog light covers, 2 adhesion promoter wipes, 1 alignment guide card, 1 microfiber cleaning cloth |
| Shipping Weight | 1,400 g (3.09 lb) |
What's in the Box
- 2×ABS fog light covers (left and right)
- 2×Automotive adhesion promoter wipes
- 1×Alignment guide card
- 1×Microfiber cleaning cloth
Installation
- Dry-fit both covers against the front bumper corners.
- Clean and dry the bonding area with a finish-compatible cleaner. Use the included adhesion promoter only on compatible bonding surfaces, following its directions.
- Peel the tape backing, align with the guide card and press firmly along the bonding edges for 30 seconds. Do not cover the lamp lens or openings.
- Allow at least the stated 24-hour cure period before washing or heavy rain; follow the adhesive instructions for actual temperature and surface conditions.
Good to Know
Caution
- Fits the 2025+ Model Y refresh and Model YL.
- Align the covers with the guide card before pressing; they are decorative trim pieces, not lights.
- Allow 24 hours to cure before washing or heavy rain.
Care
- Allow the adhesive to cure before washing; avoid directing pressure-washer spray at bonded edges.
FAQ
Which cars does it fit?
Model Y Juniper (2025+) and Model YL. These are decorative covers, not replacement lamps.
How long before I can wash the car?
Allow the stated 24 hours before washing or heavy rain. Actual adhesive instructions, temperature and bonding surface determine the cure conditions.
What is in the box?
Two ABS fog light covers (left and right), two adhesion promoter wipes, one precision alignment guide card and one microfiber cleaning cloth.
English 
German 
Spanish 