Four Extensions That Add a Door-Handle Pull Point
These ABS extensions add a raised grip to the exterior door handles of Tesla Model 3 and Model Y. Choose glossy carbon-fiber texture, matte carbon-fiber texture or glossy black. Each set contains four extensions with pre-mounted adhesive strips. They provide an additional place to pull; they do not prevent freezing or thaw a jammed handle.
- Set of 4
- ABS Material
- Pre-Mounted 3M Tape
- 3 Finishes
Key Features
-
Ergonomic Pull Point
The extension gives a more comfortable position to pull the handle
-
Additional Grip
The extension adds a pull point to the handle; it does not prevent ice or thaw a frozen mechanism.
-
Set Of Four
One extension for each door
-
ABS Construction
The extensions are made of lightweight ABS plastic
-
Three Finishes
Choose glossy carbon fiber texture, matte carbon fiber texture or glossy black
-
Pre-Mounted Tape
3M adhesive strips are pre-mounted, so no drilling or modification is needed
-
Adhesive Installation
Position each extension on the cleaned handle and allow the tape to cure before pulling.
Highlights
An Added Pull Point
The installed view shows the extension projecting from the original handle.
A Four-Piece Set in Your Chosen Finish
This image shows a carbon-texture set. Choose glossy carbon-fiber texture, matte carbon-fiber texture or glossy black at purchase; the carbon-texture versions are ABS rather than solid carbon fiber.
Align Before Bonding
Dry fit each extension before exposing the pre-mounted tape. Clean and dry the handle, align the piece and press firmly. Allow the adhesive to cure before using the added grip.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 | Set of 4, one per door | |
| Model Y | Set of 4, one per door |
Fits Model 3 and Model Y exterior handles.
Specifications
| Product Type | Door handle extensions, set of 4 |
|---|---|
| Compatible Models | Model 3, Model Y |
| Position / Location | Exterior door handles, one per door |
| Material | ABS plastic |
| Surface Finish | Glossy carbon fiber texture, matte carbon fiber texture or glossy black |
| Quantity | 4 pieces (one for each door) |
| Installation Type | Pre-mounted 3M adhesive strips; no drilling or tools |
| Drilling Required | No |
| Package Contents | 4 door handle extensions with pre-mounted 3M adhesive strips |
| Shipping Weight | 330 g (0.73 lb) |
What's in the Box
- 4×Door handle extensions (one for each door)
- Pre-mounted 3M adhesive strips
Installation
- Clean the bonding surface with a finish-compatible cleaner and dry it.
- Peel off the backing of the 3M adhesive strip and press the extension firmly onto the handle.
- Allow 24 hours of adhesive cure time, per the product instructions.
Good to Know
Caution
- Adhesive cure time is 24 hours.
- Use a cleaner compatible with the handle finish and dry the bonding area.
- The extension does not prevent freezing or thaw ice.
Care
- Keep ice and debris away from the handle using the vehicle instructions. Do not pry or pull against a frozen mechanism.
FAQ
Do they fit both Model 3 and Model Y?
Yes. They fit Model 3 and Model Y exterior door handles.
Can I install them without tools?
Yes. The installation is tool-free: press the extension onto the handle using the 3M adhesive strips.
How long should the adhesive cure?
24 hours, per the product instructions.
Do the extensions prevent the handle from freezing?
No. They add a pull point but do not prevent ice or thaw a frozen mechanism.
English 
German 
Spanish 