Shaped Guards for Lower Seat and Floor Trim
This six-piece TPE guard set is listed for the six-seat Model YL from 2026 onward, with different shapes for under-seat spaces across the three rows. The references show raised profiles around selected rail-base and floor-trim areas and openings near the under-seat vents. A fitting diagram places each piece.
- Six-Piece Set
- TPE Material
- Position-Specific Shapes
- Six-Seat Model YL
Key Features
-
Six-Piece Listing
The listed set contains six under-seat guards for the six-seat Model YL; match individual shapes to the supplied placement diagram.
-
TPE Construction
The guards are listed as TPE, with shaped raised edges that cover selected floor and seat-base trim surfaces.
-
Front Rail Profile
The front installed reference shows a shaped guard around the lower seat-rail area, leaving the seat controls above it accessible.
-
Vent Openings
The rear-facing reference has openings at the under-seat vents.
-
Different Guard Shapes
Long front profiles and broader lower-trim profiles appear in the references; they are not interchangeable universal covers.
-
Removable Cleaning
Remove the guards to clean their surfaces and the floor underneath, then dry them and recheck all seat and vent clearances.
Highlights
Front Rail-Base Reference
The front-seat reference shows a shaped lower guard surrounding the rail-base trim. It does not cover the seat upholstery.
Vented Lower-Trim Reference
The area behind the front seats is shown with openings near the under-seat vents and space around the center console.
Rear Foot-Space Reference
The rear cabin view illustrates broader shaped guards around lower seat and floor trim, following the individual piece layout.
Match Individual Pieces
The listing specifies one six-piece set with position-specific shapes, placed using the supplied diagram; it is not two identical guards per row.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model YL six-seat | 2026+ as listed | Different guards for selected under-seat and lower-trim areas across the three row spaces. |
For the listed six-seat Model YL layout. Does not fit other Model Y versions or altered floor or seat configurations. These are lower-trim guards, not covers for the seat upholstery or airbag seams.
Specifications
| Product Type | Under-seat corner and lower-trim guards |
|---|---|
| Compatible Models | Model YL six-seat, 2026+ as listed |
| Position / Location | Selected under-seat floor and rail-base trim areas across the front, second and third row spaces |
| Material | TPE |
| Color | Black |
| Quantity | 6 pieces in the listed set |
| Installation Type | Direct placement; no tools specified |
| Package Contents | 6 under-seat corner guards |
| Care Instructions | Remove, clean gently and dry fully before replacing |
What's in the Box
- 6 under-seat corner guards in the listed set
Installation
- Park safely and clean the intended lower-trim areas. Identify each guard using the supplied layout and actual vehicle contours.
- Place each matching guard without forcing it into moving tracks, mechanisms or wiring. Align the vent openings and keep controls and belt anchors accessible.
Good to Know
Caution
- Match each piece to the exact lower-trim position and the supplied fitting diagram. Do not cover the seat cushion, seat-side airbag seams, belt anchors, moving tracks, mechanisms, wiring or controls.
- Keep the vents, passenger foot space and driver’s pedal area clear.
- These are trim guards, not steps, cargo anchors or a sealed floor liner. Do not stand on them or assume protection against every scuff, impact or spill. Cutouts alone do not establish unrestricted airflow.
Care
- Remove the guards before rinsing or wiping with mild detergent. Do not rinse them over the seat wiring or mechanisms.
- Dry the guards and the floor fully before reinstalling.
FAQ
How many guards are included?
The listing specifies six pieces. Match them using the supplied fitting diagram; the total does not establish an equal piece count for each row.
Do these cover the seats themselves?
No. They are guards for selected lower seat-base and floor-trim areas, rather than upholstery covers.
Are seat movement and airflow guaranteed?
No. The guards have vent openings, seat movement and airflow are not promised.
How should I clean them?
Remove them, clean gently with water or a damp cloth, then dry them and the floor before reinstalling. Do not wash over seat wiring or moving mechanisms.
English 
German 
Spanish 