A Shaped ABS Tool for Wheel-Cover Removal
This single black ABS pry tool provides a shaped lever for removing snap-on wheel covers. The product photos show its tip engaging a cover release area, rather than an arbitrary wheel edge. Wheel-cover style and clip design matter as well as the vehicle model.
- ABS Body
- Black
- 1 Piece
- Hand-operated
Key Features
-
ABS Body
The black plastic lever has a shaped end for accessing suitable wheel-cover release points; it is not a metal crowbar.
-
Shaped Tip
The wide end and curved projection are visible in the product photos; match them to the cover’s intended removal interface.
-
Wheel Cover Access
Use the tool when removing a compatible snap-on cover for cleaning or wheel service, following that cover’s removal instructions.
-
Controlled Handling
The long handle and ribbed grip area allow hand positioning away from the contact point; excessive force can still damage a cover.
-
Store with Tools
Keep the single lever in a tool bag or vehicle storage compartment after use, with its tip clean and away from loose grit.
-
One Piece
The package contains one black wheel-cover pry tool; wheel covers, wheels and additional repair equipment are not included.
Highlights
Shaped Lever Tip
The full tool photo shows the wide tip, curved projection and ribbed grip area.
A Cover Release Application
The use photo shows the tool engaging a particular wheel-cover area. It is an example of the intended task, not proof that every cover on every Tesla uses the same contact point.
Cover Release Point
A full wheel cover, center cap and aftermarket cover can have different clips and removal methods. Follow the instructions for the part being removed; do not force a mismatched tool into a gap.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model Y Juniper | 2025+ | For snap-on wheel covers with a release point. |
| Model 3 Highland | 2024+ | For snap-on wheel covers with a release point. |
| Model Y | 2020–2025.03 | For snap-on wheel covers with a release point. |
| Model 3 | 2017–2023.10 | For snap-on wheel covers with a release point. |
The ranges above identify the source-listed Model 3 and Model Y applications. Model S, Model X, Model YL and aftermarket covers are not listed applications.
Specifications
| Product Type | Wheel-cover removal pry tool |
|---|---|
| Compatible Models | Model 3 and Model Y ranges below; actual wheel-cover interface must match |
| Material | ABS |
| Color | Black |
| Quantity | 1 piece |
| Package Contents | 1 black pry tool |
| Installation Method | Hand-operated lever at a compatible cover’s designated release point |
| Design | Shaped lever tip with ribbed grip area |
What's in the Box
- 1×Black wheel-cover removal pry tool
Installation
- Park the vehicle and locate the cover release point.
- Inspect and clean the tool tip and contact area. Align the shaped tip with the designated release point shown in the instructions for that cover.
- Engage the tip as instructed and apply controlled pressure while keeping fingers clear. Stop if the tool slips, the interface does not match or release requires excessive force.
- Refit the cover by its installation procedure.
Good to Know
Caution
- Use only the removal point and procedure specified for your actual wheel cover or center cap. Do not pry at an arbitrary rim, tire, valve or trim edge. Stop if the tip does not engage correctly or the cover resists release.
- ABS construction does not guarantee scratch-free removal.
- Vehicle name and model year alone do not establish compatibility. Full wheel covers and center caps may use different removal procedures.
Care
- Wipe the tool clean after use and store it with other hand tools.
FAQ
Does the ABS tip guarantee no scratches?
No. Grit, an incorrect contact point or excessive leverage can still mark or damage a cover or wheel. Clean the surfaces and use the correct removal procedure.
Does every Tesla wheel cover use this tool?
No. It works on snap-on covers with a release point; aftermarket covers and center caps may differ.
Where should I insert the tip?
Use the designated release point in the instructions for your actual cover. The supplier image demonstrates one cover arrangement; it does not authorize prying at any rim, tire or trim edge.
What comes in the package?
One black ABS wheel-cover pry tool. Wheels, covers and other repair equipment shown with it are excluded.
English 
German 
Spanish 