{"id":28372,"date":"2026-10-04T22:56:25","date_gmt":"2026-10-05T06:56:25","guid":{"rendered":"https:\/\/tesvx.com\/?post_type=product&p=28372"},"modified":"2026-10-04T23:11:54","modified_gmt":"2026-10-05T07:11:54","slug":"abs-front-lip-spoiler-for-tesla-model-y-juniper","status":"publish","type":"product","link":"https:\/\/tesvx.com\/es\/product\/abs-front-lip-spoiler-for-tesla-model-y-juniper\/","title":{"rendered":"3-Piece ABS Front Lip Spoiler with Gloss, Matte & Carbon-Pattern Finishes for Tesla Model Y Juniper \/ Model YL"},"content":{"rendered":"
\n
\n

Three-Piece ABS Front Lip for Model Y Juniper and Model YL<\/h3>\n

This three-piece ABS front lip fits the redesigned bumper on Model Y Juniper (2025+) and Model YL (2026+). A center segment and two side segments use pre-applied 3M VHB tape. Choose Matte Black, Glossy Black, Matte Carbon texture or Glossy Carbon texture; the carbon options are finishes on ABS, not carbon-fiber construction.<\/p>\n

    \n
  • Juniper & YL Fit<\/li>\n
  • ABS Plastic<\/li>\n
  • Three Pieces<\/li>\n
  • 4 Finishes<\/li>\n
  • 3M VHB Tape<\/li>\n<\/ul>\n<\/section>\n
    \n

    Caracter\u00edsticas principales<\/h4>\n
      \n
    1. \n
      Refreshed Bumper Fit<\/h5>\n

      Designed for Model Y Juniper (2025+) and Model YL (2026+)<\/p>\n<\/li>\n

    2. \n
      ABS Construction<\/h5>\n

      ABS plastic front lip segments<\/p>\n<\/li>\n

    3. \n
      Zero Drilling Install<\/h5>\n

      Pre-applied automotive-grade 3M VHB tape means a non-invasive peel-and-stick installation<\/p>\n<\/li>\n

    4. \n
      Three-Piece Modular Design<\/h5>\n

      A center segment and left and right side segments make alignment easy<\/p>\n<\/li>\n

    5. \n
      UV-Resistant Clear Coat<\/h5>\n

      Every finish is coated to help prevent yellowing and fading<\/p>\n<\/li>\n

    6. \n
      Four Finish Options<\/h5>\n

      Choose Matte Black, Glossy Black, Matte Carbon texture or Glossy Carbon texture<\/p>\n<\/li>\n

    7. \n
      Lower Front Styling<\/h5>\n

      Adds a lip along the lower front bumper<\/p>\n<\/li>\n<\/ol>\n<\/section>\n

      \n

      Aspectos destacados<\/h4>\n
      \"Refreshed
      \n
      Refreshed Front Bumper Fit<\/h5>\n

      Designed for Model Y Juniper (2025+) and Model YL (2026+), with a shape that follows the redesigned lower bumper. It is not compatible with Model Y 2020\u20132024.<\/p>\n<\/figcaption><\/figure>\n

      \"Lower
      \n
      Lower Front Styling<\/h5>\n

      The front lip adds a shaped edge below the front bumper.<\/p>\n<\/figcaption><\/figure>\n

      \"Three
      \n
      Three ABS Segments<\/h5>\n

      The kit comprises one center lip segment and two side segments. Test-fit all pieces with the adhesive backing still attached.<\/p>\n<\/figcaption><\/figure>\n

      \"Four
      \n
      Four Surface Finishes<\/h5>\n

      Choose Matte Black, Glossy Black, Matte Carbon texture or Glossy Carbon texture. Carbon texture describes the finish; the lip body is ABS.<\/p>\n<\/figcaption><\/figure>\n<\/section>\n

      \n

      Compatibilidad<\/h4>\n
      \n\n\n\n\n\n\n
      Modelo<\/th>\nYears \/ Version<\/th>\nNotas<\/th>\n<\/tr>\n<\/thead>\n
      Model Y Juniper<\/td>\n2025+<\/td>\nRedesigned front bumper<\/td>\n<\/tr>\n
      Model YL<\/td>\n2026+<\/td>\nRedesigned front bumper<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

      Not compatible with Model Y 2020\u20132024. Complete a test fit with the adhesive backing still on before final application.<\/p>\n<\/section>\n

      \n

      Especificaciones<\/h4>\n
      \n\n\n\n\n\n\n\n\n\n\n\n\n\n
      Tipo de producto<\/th>\n3-piece front lip spoiler<\/td>\n<\/tr>\n
      Compatible Models<\/th>\nModel Y Juniper (2025+) and Model YL (2026+)<\/td>\n<\/tr>\n
      Position \/ Location<\/th>\nLower front bumper<\/td>\n<\/tr>\n
      Material<\/th>\nHigh-quality ABS plastic with UV-resistant clear coat<\/td>\n<\/tr>\n
      Surface Finish<\/th>\nGlossy Black, Matte Black, Matte Carbon texture, Glossy Carbon texture<\/td>\n<\/tr>\n
      Cantidad<\/th>\n3 pieces (1 center + 2 side)<\/td>\n<\/tr>\n
      Installation Type<\/th>\nPre-applied 3M VHB tape; peel-and-stick<\/td>\n<\/tr>\n
      Drilling Required<\/th>\nNo<\/td>\n<\/tr>\n
      Contenido del paquete<\/th>\nCenter lip segment, left and right side lip segments, installation guide<\/td>\n<\/tr>\n
      Care Instructions<\/th>\nCure 48-72 hours before highway speeds or washing; automatic car wash after 7 days<\/td>\n<\/tr>\n
      Peso del env\u00edo<\/th>\n12 kg (26.5 lb)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/section>\n
      \n

      What's in the Box<\/h4>\n
        \n
      • 1\u00d7<\/b>Center Lip Segment<\/li>\n
      • 2\u00d7<\/b>Side Lip Segments (Left and Right)<\/li>\n
      • 1\u00d7<\/b>Installation Guide<\/li>\n<\/ul>\n<\/section>\n
        \n

        Instalaci\u00f3n<\/h4>\n
        \n
        \n
        Difficulty<\/dt>\n
        Moderate<\/dd>\n<\/div>\n
        \n
        Tiempo<\/dt>\n
        Cure 48-72 hours<\/dd>\n<\/div>\n
        \n
        Herramientas<\/dt>\n
        Isopropyl alcohol, masking tape, hair dryer and painter's tape<\/dd>\n<\/div>\n<\/dl>\n
          \n
        1. Wipe the lower bumper with isopropyl alcohol, remove wax, dirt or ceramic coating from the adhesion area and let it dry; install at 15-30\u00b0C (59-86\u00b0F).<\/li>\n
        2. Assemble the 3 pieces and position them with the adhesive backing still on, using masking tape to mark the alignment.<\/li>\n
        3. Lightly heat the 3M tape with a hair dryer for 30-60 seconds to activate the adhesive.<\/li>\n
        4. Peel the backing from the center piece, align it with your marks and press firmly for 30 seconds, then repeat for the side pieces.<\/li>\n
        5. Hold pressure with painter's tape overnight; the adhesive takes 48-72 hours to bond fully.<\/li>\n<\/ol>\n<\/section>\n
          \n

          Conviene saber<\/h4>\n
          \n
          \n
          Precauci\u00f3n<\/span><\/h5>\n
            \n
          • Test-fit every segment with the adhesive backing still on.<\/li>\n
          • Install at 15-30\u00b0C (59-86\u00b0F) and allow 48-72 hours to cure before highway speeds or washing.<\/li>\n
          • Use automatic car washes only after the 7-day adhesive cure and avoid pointing high-pressure washers at the seams.<\/li>\n
          • Fits Model Y Juniper (2025+) and Model YL (2026+) only.<\/li>\n<\/ul>\n<\/div>\n
            \n
            Cuidado<\/span><\/h5>\n
              \n
            • Clean regularly with pH-neutral car soap and a soft microfiber towel.<\/li>\n
            • Use automatic car washes only after the initial 7-day adhesive cure, and avoid pointing high-pressure washers at the seams.<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/section>\n
              \n

              Preguntas frecuentes<\/h4>\n
              \nDo I need to drill holes to install this?<\/summary>\n

              No. The 3-piece lip comes with pre-applied automotive-grade 3M VHB tape. Clean the bumper, align and press firmly; no permanent modifications are required.<\/p>\n<\/details>\n

              \nWill this fit older Model Y versions (2020-2024)?<\/summary>\n

              No. It is engineered exclusively for the redesigned front bumper of the Model Y Juniper (2025+) and Model YL (2026+).<\/p>\n<\/details>\n

              \nWhat if I want to remove it before selling the car?<\/summary>\n

              The tape is removable. Apply gentle heat, slice through the tape with dental floss or fishing line behind the lip, and wipe any residue away with adhesive remover.<\/p>\n<\/details>\n

              \nAre the carbon finishes made from carbon fiber?<\/summary>\n

              No. The material is ABS plastic; Matte Carbon and Glossy Carbon are texture finishes.<\/p>\n<\/details>\n

              \nWhat parts are included?<\/summary>\n

              The source lists one center lip segment, two side lip segments for left and right, and an installation guide.<\/p>\n<\/details>\n<\/section>\n<\/div>","protected":false},"excerpt":{"rendered":"

              Three-Piece ABS Front Lip for Model Y Juniper and Model YL This three-piece ABS front lip fits the redesigned bumper on Model Y Juniper (2025+) and Model YL (2026+). A center segment and two side segments use pre-applied 3M VHB tape. Choose Matte Black, Glossy Black, Matte Carbon texture or Glossy Carbon texture; the carbon […]<\/p>\n","protected":false},"featured_media":16164,"comment_status":"open","ping_status":"closed","template":"","meta":{"_gspb_post_css":""},"product_brand":[127],"product_cat":[419,320],"product_tag":[268,269,270,271,285,353,279,280,287,281],"class_list":["post-28372","product","type-product","status-publish","has-post-thumbnail","product_brand-autoboss","product_cat-tesvx-exterior-trim","product_cat-tesvx-carbon-fiber","product_tag-268","product_tag-2025j","product_tag-270","product_tag-accessories","product_tag-exterior","product_tag-front-lip","product_tag-model-y-juniper","product_tag-model-yl","product_tag-mods","product_tag-new-model-y","first","instock","sale","shipping-taxable","purchasable","product-type-variable","has-default-attributes"],"_links":{"self":[{"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/product\/28372","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/comments?post=28372"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/media\/16164"}],"wp:attachment":[{"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/media?parent=28372"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/product_brand?post=28372"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/product_cat?post=28372"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/product_tag?post=28372"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}