{"id":28350,"date":"2026-10-04T22:56:24","date_gmt":"2026-10-05T06:56:24","guid":{"rendered":"https:\/\/tesvx.com\/?post_type=product&p=28350"},"modified":"2026-10-04T23:10:14","modified_gmt":"2026-10-05T07:10:14","slug":"starlink-gen3-split-wall-mount-kit","status":"publish","type":"product","link":"https:\/\/tesvx.com\/es\/product\/starlink-gen3-split-wall-mount-kit\/","title":{"rendered":"ABS Router & Power Adapter Wall Mount Kit with Adhesive or Screw Install for Starlink Gen 3"},"content":{"rendered":"
\n
\n

Wall Mount for the Gen 3 Router and Power Supply<\/h3>\n

Keep a Starlink Gen 3 UTR-32 router and its matching V3 power supply together on the wall. This white ABS bracket has an upper router cradle and a lower power supply position, with adhesive pads, self-tapping screws and wall anchors included.<\/p>\n

    \n
  • Gen 3 UTR-32<\/li>\n
  • Router + Power Supply<\/li>\n
  • ABS Plastic<\/li>\n
  • Adhesive or Screws<\/li>\n<\/ul>\n<\/section>\n
    \n

    Caracter\u00edsticas principales<\/h4>\n
      \n
    1. \n
      Two Device Positions<\/h5>\n

      The upper cradle holds the router, with a separate power supply position below.<\/p>\n<\/li>\n

    2. \n
      ABS Frame<\/h5>\n

      The white plastic bracket provides both device positions in one wall-mounted frame.<\/p>\n<\/li>\n

    3. \n
      Model-Specific Shape<\/h5>\n

      The cradle and retention points are shaped for the Gen 3 UTR-32 router and matching V3 power supply.<\/p>\n<\/li>\n

    4. \n
      Two Mounting Methods<\/h5>\n

      Choose adhesive mounting on a compatible smooth surface or a wall-appropriate screw installation.<\/p>\n<\/li>\n

    5. \n
      Hardware Included<\/h5>\n

      The kit includes adhesive pads, self-tapping screws and wall anchors.<\/p>\n<\/li>\n

    6. \n
      Cable Routing Space<\/h5>\n

      The layout leaves space behind the bracket for arranging cables without pulling on the device ports.<\/p>\n<\/li>\n<\/ol>\n<\/section>\n

      \n

      Aspectos destacados<\/h4>\n
      \"Two
      \n
      Two Positions, One Bracket<\/h5>\n

      The installed view shows the router above the power supply in one frame. Starlink devices and their cables are shown for placement and are separate from the mount kit.<\/p>\n<\/figcaption><\/figure>\n

      \"Seat
      \n
      Seat Each Device<\/h5>\n

      The illustrated sequence shows the power supply sliding into its lower position, cable routing behind the frame and the router aligning with the upper retention points.<\/p>\n<\/figcaption><\/figure>\n

      \n
      ABS Mounting Frame<\/h5>\n

      The white ABS frame combines the device cradles, wall mounting holes and retention points.<\/p>\n<\/figcaption><\/figure>\n

      \n
      Choose the Wall Attachment<\/h5>\n

      The supplied adhesive pads are described for smooth glass or ceramic tile. For screw mounting, choose fasteners and anchors suitable for the wall and the full device load.<\/p>\n<\/figcaption><\/figure>\n<\/section>\n

      \n

      Compatibilidad<\/h4>\n
      \n\n\n\n\n\n
      Modelo<\/th>\nYears \/ Version<\/th>\nNotas<\/th>\n<\/tr>\n<\/thead>\n
      Starlink Gen 3 router<\/td>\n<\/td>\nUTR-32 router with matching V3 power supply.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

      This is the router and power supply bracket, not a dish mount. Fits the listed devices only.<\/p>\n<\/section>\n

      \n

      Especificaciones<\/h4>\n
      \n\n\n\n\n\n\n\n\n\n
      Tipo de producto<\/th>\nRouter and power supply wall mount kit<\/td>\n<\/tr>\n
      Compatible Models<\/th>\nStarlink Gen 3 router UTR-32 and matching V3 power supply<\/td>\n<\/tr>\n
      Material<\/th>\nABS plastic<\/td>\n<\/tr>\n
      Color<\/th>\nWhite<\/td>\n<\/tr>\n
      Dimensiones<\/th>\n6.72 in wide \u00d7 5.36 in high (17.1 \u00d7 13.6 cm); depth excluded<\/td>\n<\/tr>\n
      Installation Type<\/th>\n3M adhesive pads on compatible smooth glass or tile, or screws and suitable wall anchors<\/td>\n<\/tr>\n
      Drilling Required<\/th>\nFor screw mounting; adhesive option requires no drilling<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/section>\n
      \n

      What's in the Box<\/h4>\n
        \n
      • 1\u00d7<\/b>Router and power supply wall mount kit<\/li>\n
      • 3M adhesive pads<\/li>\n
      • Self-tapping screws<\/li>\n
      • Wall anchors<\/li>\n<\/ul>\n<\/section>\n
        \n

        Instalaci\u00f3n<\/h4>\n
        \n
        \n
        Difficulty<\/dt>\n
        Moderate<\/dd>\n<\/div>\n
        \n
        Herramientas<\/dt>\n
        Wall-appropriate drill and driver for screw mounting; included pads or screws and wall anchors as suitable<\/dd>\n<\/div>\n<\/dl>\n
          \n
        1. Choose a dry indoor location with room for both devices, ventilation and access to the cable connections.<\/li>\n
        2. Fix the empty bracket using the mounting method appropriate for the wall and complete device load. Follow adhesive bonding instructions or wall anchor instructions before loading it.<\/li>\n
        3. Disconnect device power. Seat the power supply in its lower position, route cables without pinching or pulling and align the router with the upper retention points.<\/li>\n
        4. Connect cables and restore power.<\/li>\n<\/ol>\n<\/section>\n
          \n

          Conviene saber<\/h4>\n
          \n
          \n
          Precauci\u00f3n<\/span><\/h5>\n
            \n
          • Fits the Gen 3 UTR-32 router and matching V3 power supply only.<\/li>\n
          • Use the adhesive option only on a compatible clean, smooth glass or ceramic tile surface and within the pad instructions. Paint or textured walls require screw mounting.<\/li>\n
          • Choose screws and anchors for the actual wall construction and device load.<\/li>\n
          • Leave the router and power supply ventilated in a dry indoor location. Keep device ports accessible and cables loose enough to avoid strain.<\/li>\n
          • A moving RV or boat installation needs suitable mechanical attachment and restraint for movement.<\/li>\n<\/ul>\n<\/div>\n
            \n
            Cuidado<\/span><\/h5>\n
              \n
            • Keep the equipment ventilated; do not wrap the devices or pack excess cable tightly around a heat-producing power supply.<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/section>\n
              \n

              Preguntas frecuentes<\/h4>\n
              \nDoes the kit include the router or power supply?<\/summary>\n

              No. It is a wall mount kit for your Gen 3 UTR-32 router and matching V3 power supply.<\/p>\n<\/details>\n

              \nAre there two separate wall brackets?<\/summary>\n

              The photos show one frame with separate upper and lower positions for the router and power supply.<\/p>\n<\/details>\n

              \nCan I install it without drilling?<\/summary>\n

              Yes. The included adhesive pads are for a compatible smooth glass or ceramic tile surface.<\/p>\n<\/details>\n

              \nCan the included anchors be used in every wall?<\/summary>\n

              Select anchors and screws for the actual wall construction and device load. The included fasteners are not a universal solution for all walls.<\/p>\n<\/details>\n

              \nWill the mount improve Wi-Fi performance?<\/summary>\n

              It organizes the devices on a wall. Choose the router location for your layout and coverage requirements, while keeping ventilation and cable access clear.<\/p>\n<\/details>\n<\/section>\n<\/div>","protected":false},"excerpt":{"rendered":"

              Wall Mount for the Gen 3 Router and Power Supply Keep a Starlink Gen 3 UTR-32 router and its matching V3 power supply together on the wall. This white ABS bracket has an upper router cradle and a lower power supply position, with adhesive pads, self-tapping screws and wall anchors included. Gen 3 UTR-32 Router […]<\/p>\n","protected":false},"featured_media":25179,"comment_status":"open","ping_status":"closed","template":"","meta":{"_gspb_post_css":""},"product_brand":[127],"product_cat":[742],"product_tag":[477,467],"class_list":["post-28350","product","type-product","status-publish","has-post-thumbnail","product_brand-autoboss","product_cat-accessories-starmount","product_tag-mounts-and-bases","product_tag-starlink","first","instock","shipping-taxable","purchasable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/product\/28350","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/comments?post=28350"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/media\/25179"}],"wp:attachment":[{"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/media?parent=28350"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/product_brand?post=28350"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/product_cat?post=28350"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/tesvx.com\/es\/wp-json\/wp\/v2\/product_tag?post=28350"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}