{"id":28396,"date":"2026-10-04T22:56:29","date_gmt":"2026-10-05T06:56:29","guid":{"rendered":"https:\/\/tesvx.com\/?post_type=product&p=28396"},"modified":"2026-10-04T23:11:55","modified_gmt":"2026-10-05T07:11:55","slug":"tesvx-side-mirror-cover-for-tesla-model-y-inspired-by-model-y-juniper-style-carbon-fiber-exterior-mods","status":"publish","type":"product","link":"https:\/\/tesvx.com\/de\/product\/tesvx-side-mirror-cover-for-tesla-model-y-inspired-by-model-y-juniper-style-carbon-fiber-exterior-mods\/","title":{"rendered":"2-Piece Dry Carbon Fiber Side Mirror Covers with Glossy, Matte & Forged Finishes for Tesla Model 3 \/ Model Y"},"content":{"rendered":"
\n
\n

Carbon Mirror Overlays in Three Finishes<\/h3>\n

These dry carbon-fiber overlays add a shaped cover to the existing left and right exterior mirror housings. Choose Glossy Carbon Fiber, Matte Carbon Fiber or Glossy Forged Carbon Fiber in the correct Model Y, Model 3 or Highland option. The pair attaches with pre-applied 3M tape.<\/p>\n

    \n
  • Carbon Fiber<\/li>\n
  • Three Finishes<\/li>\n
  • Left and Right Pair<\/li>\n
  • Pre-Applied 3M Tape<\/li>\n<\/ul>\n<\/section>\n
    \n

    Hauptmerkmale<\/h4>\n
      \n
    1. \n
      Carbon Mirror Overlays<\/h5>\n

      The covers fit over the existing exterior mirror housings rather than replacing the mirror glass or complete mirror assemblies.<\/p>\n<\/li>\n

    2. \n
      Glossy or Matte Weave<\/h5>\n

      Glossy Carbon Fiber and Matte Carbon Fiber provide two surface finishes on the woven design.<\/p>\n<\/li>\n

    3. \n
      Glossy Forged Option<\/h5>\n

      Glossy Forged Carbon Fiber has a marbled pattern, shown in the paired product and installed view.<\/p>\n<\/li>\n

    4. \n
      Left and Right Pair<\/h5>\n

      The package contains two covers in the selected finish, one for each side.<\/p>\n<\/li>\n

    5. \n
      Pre-Applied Tape<\/h5>\n

      Attachment uses pre-applied 3M adhesive tape without drilling the original housings.<\/p>\n<\/li>\n

    6. \n
      Fahrzeugoptionen<\/h5>\n

      Three vehicle versions: Model Y 2020\u20132025.03, Model 3 2017\u20132023 and Model 3 Highland 2024+.<\/p>\n<\/li>\n<\/ol>\n<\/section>\n

      \n

      Highlights<\/h4>\n
      \"Glossy
      \n
      Glossy Woven Finish<\/h5>\n

      The installed product view shows the glossy weave and the shaped overlay edge.<\/p>\n<\/figcaption><\/figure>\n

      \"Glossy
      \n
      Glossy Forged Pattern<\/h5>\n

      The forged option has a marbled surface pattern on the left and right covers. Select Glossy Forged Carbon Fiber within the correct vehicle option.<\/p>\n<\/figcaption><\/figure>\n

      \"Matte
      \n
      Matte Woven Pair<\/h5>\n

      The matte option provides a lower-sheen woven finish. The paired product view shows separate left and right covers for the exterior housings.<\/p>\n<\/figcaption><\/figure>\n

      \n
      Dry-Fit Before Bonding<\/h5>\n

      The overlays use pre-applied adhesive tape.<\/p>\n<\/figcaption><\/figure>\n<\/section>\n

      \n

      Kompatibilit\u00e4t<\/h4>\n
      \n\n\n\n\n\n\n\n
      Modell<\/th>\nYears \/ Version<\/th>\nHinweise<\/th>\n<\/tr>\n<\/thead>\n
      Model Y<\/td>\n2020\u20132025.03<\/td>\nSelect Model Y 2020 \u2013 2025.03; pre-Juniper only.<\/td>\n<\/tr>\n
      Model 3<\/td>\n2017\u20132023<\/td>\nModel 3 2017 \u2013 2023 option.<\/td>\n<\/tr>\n
      Model 3 Highland<\/td>\n2024+<\/td>\nModel 3 Highland 2024+ option.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

      Juniper describes the styling inspiration; the Model Y cover fits the pre-Juniper vehicle and does not fit Model Y Juniper.<\/p>\n<\/section>\n

      \n

      Technische Daten<\/h4>\n
      \n\n\n\n\n\n\n\n\n\n\n
      Produkttyp<\/th>\nExterior mirror-cover overlays<\/td>\n<\/tr>\n
      Compatible Models<\/th>\nModel Y 2020\u20132025.03 \/ Model 3 2017\u20132023 \/ Model 3 Highland 2024+<\/td>\n<\/tr>\n
      Position \/ Location<\/th>\nLeft and right exterior mirror housings<\/td>\n<\/tr>\n
      Material<\/th>\nDry carbon fiber<\/td>\n<\/tr>\n
      Surface Finish<\/th>\nGlossy Carbon Fiber \/ Matte Carbon Fiber \/ Glossy Forged Carbon Fiber<\/td>\n<\/tr>\n
      Menge<\/th>\n2 covers: left and right<\/td>\n<\/tr>\n
      Installation Type<\/th>\nPre-applied 3M adhesive tape; no drilling<\/td>\n<\/tr>\n
      Lieferumfang<\/th>\nLeft and right covers in selected finish, pre-applied tape and installation instructions<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/section>\n
      \n

      What's in the Box<\/h4>\n
        \n
      • 2\u00d7<\/b>Carbon fiber mirror covers (left and right, selected finish)<\/li>\n
      • Pre-applied 3M adhesive tape<\/li>\n
      • Installation instructions<\/li>\n<\/ul>\n<\/section>\n
        \n

        Installation<\/h4>\n
        \n
        \n
        Difficulty<\/dt>\n
        Easy<\/dd>\n<\/div>\n
        \n
        Werkzeuge<\/dt>\n
        Surface-compatible cleaner and a microfiber cloth<\/dd>\n<\/div>\n<\/dl>\n
          \n
        1. Dry-fit the left and right covers with tape liners intact.<\/li>\n
        2. Clean the bonding areas using products compatible with the mirror finish and coatings, then dry fully. Follow the supplied tape preparation and temperature requirements.<\/li>\n
        3. Peel a small section of liner, align the cover with the housing and remove the remaining liner while applying even pressure at the intended bonding areas.<\/li>\n
        4. Repeat on the other side. Follow the supplied pressure and cure requirements; avoid water for at least the initial 24 hours or the longer period required by the tape instructions.<\/li>\n<\/ol>\n<\/section>\n
          \n

          Gut zu wissen<\/h4>\n
          \n
          \n
          Achtung<\/span><\/h5>\n
            \n
          • The Model Y option is for the original pre-Juniper body. Juniper-inspired styling does not mean fitment for the revised Model Y Juniper from April 2025 onward.<\/li>\n
          • Do not stack over another cover or force a poor fit.<\/li>\n
          • Use cleaning products compatible with the housing finish and existing coatings. Waxes and coatings can affect bonding.<\/li>\n
          • Avoid wetting the bond for the initial 24-hour period and follow any longer period in the supplied tape instructions.<\/li>\n
          • Removal can leave residue or affect the original finish. Use surface-compatible removal methods without prying or pulling on mirror glass or mechanisms.<\/li>\n<\/ul>\n<\/div>\n
            \n
            Pflege<\/span><\/h5>\n
              \n
            • Wash gently with mild soap, water and a microfiber cloth after the bond has cured. Avoid abrasive cleaners and direct pressure on overlay edges.<\/li>\n
            • Inspect adhesion periodically. Have lifted or loose edges addressed rather than relying on extra pressure; use care with washing equipment and follow the tape and finish instructions.<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/section>\n
              \n

              FAQ<\/h4>\n
              \nWill these fit Model Y Juniper?<\/summary>\n

              The Model Y option is for the pre-Juniper vehicle, listed as 2020\u20132025.03. It is not for Model Y Juniper from April 2025 onward; the styling name does not extend that fitment.<\/p>\n<\/details>\n

              \nWhat is included?<\/summary>\n

              A left and a right cover in the selected finish, with pre-applied 3M adhesive tape and installation instructions.<\/p>\n<\/details>\n

              \nDo the covers replace my mirror glass?<\/summary>\n

              They are exterior housing overlays. The original mirror glass and assemblies remain in place.<\/p>\n<\/details>\n

              \nDo I need to drill?<\/summary>\n

              The fitting method uses the pre-applied adhesive tape without drilling. Do not modify the mirror to accommodate an incorrectly fitting cover.<\/p>\n<\/details>\n

              \nCan I remove them without residue?<\/summary>\n

              Adhesive removal can leave residue or affect the underlying finish. Follow suitable tape-removal and housing-care methods, avoiding prying on glass or moving mechanisms.<\/p>\n<\/details>\n<\/section>\n<\/div>","protected":false},"excerpt":{"rendered":"

              Carbon Mirror Overlays in Three Finishes These dry carbon-fiber overlays add a shaped cover to the existing left and right exterior mirror housings. Choose Glossy Carbon Fiber, Matte Carbon Fiber or Glossy Forged Carbon Fiber in the correct Model Y, Model 3 or Highland option. The pair attaches with pre-applied 3M tape. Carbon Fiber Three […]<\/p>\n","protected":false},"featured_media":16566,"comment_status":"open","ping_status":"closed","template":"","meta":{"_gspb_post_css":""},"product_brand":[127],"product_cat":[596,320],"product_tag":[260,261,262,263,264,265,266,267,268,270,271,292,285,356,276,277,278,287,289,307],"class_list":["post-28396","product","type-product","status-publish","has-post-thumbnail","product_brand-autoboss","product_cat-tesvx-carbon-fiber-mirror-covers","product_cat-tesvx-carbon-fiber","product_tag-260","product_tag-261","product_tag-262","product_tag-263","product_tag-264","product_tag-265","product_tag-266","product_tag-267","product_tag-268","product_tag-270","product_tag-accessories","product_tag-carbon-fiber","product_tag-exterior","product_tag-mirror-cover","product_tag-model-3","product_tag-model-3-highland","product_tag-model-y","product_tag-mods","product_tag-performance","product_tag-protect-cover","first","instock","sale","shipping-taxable","purchasable","product-type-variable","has-default-attributes"],"_links":{"self":[{"href":"https:\/\/tesvx.com\/de\/wp-json\/wp\/v2\/product\/28396","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/tesvx.com\/de\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/tesvx.com\/de\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/tesvx.com\/de\/wp-json\/wp\/v2\/comments?post=28396"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/tesvx.com\/de\/wp-json\/wp\/v2\/media\/16566"}],"wp:attachment":[{"href":"https:\/\/tesvx.com\/de\/wp-json\/wp\/v2\/media?parent=28396"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/tesvx.com\/de\/wp-json\/wp\/v2\/product_brand?post=28396"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/tesvx.com\/de\/wp-json\/wp\/v2\/product_cat?post=28396"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/tesvx.com\/de\/wp-json\/wp\/v2\/product_tag?post=28396"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}